Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Tech
Tech ALL bikes: "Generic" tech questions and answers. Maintenance, general discussions etc.
Photo by Hendi Kaf, in Cambodia

I haven't been everywhere...
but it's on my list!


Photo by Hendi Kaf,
in Cambodia



Like Tree8Likes

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 21 Aug 2008
Chris Scott's Avatar
Super Moderator
Veteran HUBBer
 
Join Date: Jun 2000
Posts: 4,934
Sealing spoke wheels for tubeless

Anyone tried making a spoked rim tubeless by gluing/sealing all around the spoke nipples inside with some cunning sealant like "Liquid Vinyl" (see link below).
What grams you add in glue you more than save in inner tube. A regular rim won't have the bead-seating inner lip of course but that's only a safety thing I think and would make mounting easier anyway. You'll loose spoke tensioning ability but how often do you do that?

I wonder if the flex of a regular spoked rim (or any other number of reasons!) make this a dumb idea. Not much to be lost trying though. IMO tubeless is the way to go - if it all goes wrong you can always bung in a tube.

And what's the difference between the same tyre in tubed and tubeless versions? Is the bead smoother/different?

Ch

tubeless wire wheels? - Kawasaki Motorcycle Forums

Last edited by Chris Scott; 18 Jan 2019 at 18:29.
Reply With Quote
  #2  
Old 21 Aug 2008
AliBaba's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Norway
Posts: 1,379
Yes tubeless is the way to go, butt hen you have to buy a Boxer.... :-)

Check bottom of the page: WoodysWheelWorks.com
Reply With Quote
  #3  
Old 22 Aug 2008
beddhist's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Sep 2003
Location: Whangarei, NZ
Posts: 2,214
Maybe ok on the road, but if you deflate the tyres for dirt or sand riding you risk the tyre coming off the rim and instantly deflating. The hump may be important.

If you hit a pothole at speed, is there a danger of the tyre suddenly deflating?

BMW make tubeless spoked wheels and Honda did (some XL600 model).
__________________
Cheers,
Peter.

Europe to NZ 2006-10
Reply With Quote
  #4  
Old 22 Aug 2008
Chris Scott's Avatar
Super Moderator
Veteran HUBBer
 
Join Date: Jun 2000
Posts: 4,934
The BMW and old XLM spoked tubeless rims all avoided having the spokes go into the well of the rim to enable spoke tensioning. I dont know if Excel or someone make rims like this.

Re the hump, I remember a tubed Tenere I had in the late 80s whose Tagasako? rims for some reason had that bead-locating hump which made changing tyres a pain. I set it up on a crate without a tyre, put it in gear and ground it off.

I suppose a stiff tyre like a Desert run tubeless would stay on a humpless rim better than some, but the Tenere above suggests spoked rims did come with a hump, maybe they still do? Even then, if you visualise non-racing cornering forces on a low psi tyre in sand it does not seem too bad.

Ch
Reply With Quote
  #5  
Old 22 Aug 2008
Xander's Avatar
Super Moderator
Veteran HUBBer
 
Join Date: Aug 2006
Location: Back Down Under (WA)
Posts: 562
Quote:
Originally Posted by Chris Scott View Post
The BMW and old XLM spoked tubeless rims all avoided having the spokes go into the well of the rim to enable spoke tensioning. I dont know if Excel or someone make rims like this.

Re the hump, I remember a tubed Tenere I had in the late 80s whose Tagasako? rims for some reason had that bead-locating hump which made changing tyres a pain. I set it up on a crate without a tyre, put it in gear and ground it off.

I suppose a stiff tyre like a Desert run tubeless would stay on a humpless rim better than some, but the Tenere above suggests spoked rims did come with a hump, maybe they still do? Even then, if you visualise non-racing cornering forces on a low psi tyre in sand it does not seem too bad.

Ch
I found this recently. and thought that it is a great idea but no where can i find speed or weight ratings...

Nuetech Tubliss Core
any one willing to test pilot them..
__________________
2000 Africa Twin
http://two-up-ona-twin.blogspot.com
Reply With Quote
  #6  
Old 22 Aug 2008
Chris Scott's Avatar
Super Moderator
Veteran HUBBer
 
Join Date: Jun 2000
Posts: 4,934
Well spotted Xander, a small, chunky pushbike-sized tube to seal the tyre bead to bead, not the rim so you keep spoke tension ability.

I think I've seen similar on giant-tyred 4WDs run in Iceland for extremely low pressure (more for rim retention as they are tubeless already of course). I've also used pushbike tubes in a slightly similar way to seal and so mount tubeless 4WD tyres.

Looks like Tubliss is aimed at dirt bikes: light and relatively slow but a lot of impact flex going on - plus a van nearby. Not the same as a GS12 laden with all the Touratech fruit. Avoids the whole road-use legal issue and who can blame them, but AFAIK speed ratings are tyre related(flex + friction = heat = high wear/failure).
No friction with the red liner (or barely any compared to a full contact tube) and even less heat with Slime-like sealant, just regular tyre flex. Run a good tyre with the appropriate rating for your bike + right pressure for the load/terrain as you would normally.

I'll give them a try - all you got to do is take tubes with until you have faith in it.

Ch

Added later:

Just found this on Tubliss tire product - ADVrider

Tubliss officially is not recommending them for highway use. One reason is that they have not been tested to any standards for highway use and another reason is that if the system were to fail while riding at highway speed the tire goes flat immediately. No slow leaks, just boom and it's gone. Now having said all of that they have some customers that are using the system on the street and have had no problems as of yet. Tubliss and Brap Offroad both are selling this system for off road use only at this time. What it gets used for is out of our control.
If you have any other questions, please feel free to email me back or call me at 717-285-7873.
Thanks and have a great day.

Marty Graver
BRAP! Offroad

So, as you guys probably already know, these are for off-road, slower speed only.


I think when he says failing he means the red core bit - not a regular tyre tread puncture where a flat would occur in the normal tubeless fashion (ie: slower than tubes). If anything the red rim lock would make the deflation safer as it would hold the tyre on the rim. So as I understand it, as long as the red tube doesn't fail (it's v thick and far from the tyre tread most of the time) it's business as usual.

Last edited by Chris Scott; 22 Aug 2008 at 13:22.
Reply With Quote
  #7  
Old 22 Aug 2008
Xander's Avatar
Super Moderator
Veteran HUBBer
 
Join Date: Aug 2006
Location: Back Down Under (WA)
Posts: 562
Quote:
Originally Posted by Chris Scott View Post
Well spotted Xander, a..snip..

Just found this on Tubliss tire product - ADVrider

Tubliss officially is not recommending them for highway use. One reason is that they have not been tested to any standards for highway use and another reason is that if the system were to fail while riding at highway speed the tire goes flat immediately. No slow leaks, just boom and it's gone. Now having said all of that they have some customers that are using the system on the street and have had no problems as of yet. Tubliss and Brap Offroad both are selling this system for off road use only at this time. What it gets used for is out of our control.
If you have any other questions, please feel free to email me back or call me at 717-285-7873.
Thanks and have a great day.

Marty Graver
BRAP! Offroad

So, as you guys probably already know, these are for off-road, slower speed only.


I think when he says failing he means the red core bit - not a regular tyre tread puncture where a flat would occur in the normal tubeless fashion (ie: slower than tubes). If anything the red rim lock would make the deflation safer as it would hold the tyre on the rim. So as I understand it, as long as the red tube doesn't fail (it's v thick and far from the tyre tread most of the time) it's business as usual.
Thanks.. I been thinking about them for a few weeks .. and feel really stupid for not searching ADV rider.. :confused1: (being a member and all)

Chris I think you may be right.. I use TKC80 on my AT (which are labelled as tubeless anyway so a normal "nail in the tread" will go down at a normal rate). So with the rim locks and Red tube it should hold, better then I am running now (no rim locks, I know I know.. just have not got a round to fitting them yet) ... I was worried about heat (from weight/speed) . but your point is 100% correct.. I wonder what the failure rate of the red-tube is? I also wonder can you "slime" them (yes you will be upping the Heat but could lower the risk of catastrophic failure). Chris if you are going to give them a try I will be watching with great interest..please keep us up todate...

Edit: B**ger i just realised the dont do a 17" hmmmmm As i am changing my rims later this year anyway.. maybe i could go up to 18"
__________________
2000 Africa Twin
http://two-up-ona-twin.blogspot.com
Reply With Quote
  #8  
Old 22 Aug 2008
Chris Scott's Avatar
Super Moderator
Veteran HUBBer
 
Join Date: Jun 2000
Posts: 4,934
I also wonder can you "slime" them (yes you will be upping the Heat but could lower the risk of catastrophic failure).

Actually I believe Slime and the like reduce heat or at least dissipate it better.
Slimed my car the other month after years of thinking about it. Not infallible for punctures but then you just ram a gluey plug in and pump up which is the whole point of tubeless for me. FWIW gluey plugs also can fail I found: then you take the tyre off and go to the menders for an inner patch. And it seems you can ride flat OK on tubliss but the tyre will get very very hot even at slow speeds. Tried this on an XT in Mali once with not choice and it wrecked the tyre in 20km.

..please keep us up todate...

Will do. Contacted the UK distribs and have a trip coming up on an 18/21 bike running new TKCs. Shame they're not in 17 - maybe it's a too obvious road bike size? Anyway it's same/cheaper and a better solution than those tyre balls and more flexible than mousses, IMO

Ch

btw, will be trying one these too: probably instant landfill but worth a tenner to try with a bikepump as back up.
Airman Compact Air Compressor - Screwfix.com, Where the Trade Buys
Reply With Quote
  #9  
Old 22 Aug 2008
Registered Users
Veteran HUBBer
 
Join Date: Apr 2008
Location: West Yorkshire UK
Posts: 1,785
I don't think I like the DIY approach. Maybe it's the engineer in me but sealing air really needs the right surfaces and the right materials used in the right way. I've known enough things leak when the seals were designed to known criterea to go try the "slap enough paint on" approach. BMW must have looked at semi-liquid sealants, O-rings, diaphragms and a host of other ways to seal the tyre and eventually went for the idea of separating the mechanical and pneumatic. This is good engineering as it avoids dynamic seals (your spokes and rim flex so the seal must too) which will always leak even if you go for something like a diaphragm never mind semi-liquid stuff. For a good dynamic seal you need a diaphragm to make the seal effectively static or an O-ring type seal with the right compression throughout the movement range. Liquids have no compression and to me would leak as soon as the spokes flexed. How much is the big question.

Tyre repair gloop (basically water with suspended silicone blobs) is the equivalent of emptying the teapot down the sink. You'll think you blocked the plug hole, but come back in a few hours.....In a tyre repair the glue holds the plug (mechanical) while the rubber in compression does the sealing, hence it's a good seal.

I won't be doing this, but if you really do want to be the first (and lacking a tyre engineer to tell me otherwise), the pneumatic guy suggests keeping the rim tape. A least this will slow the flow rate if the silicone does open a leak path and will keep the seal on the spokes in compression and as static as possible.

Andy
Reply With Quote
  #10  
Old 22 Aug 2008
Xander's Avatar
Super Moderator
Veteran HUBBer
 
Join Date: Aug 2006
Location: Back Down Under (WA)
Posts: 562
Quote:
Originally Posted by Chris Scott View Post
Ch

btw, will be trying one these too: probably instant landfill but worth a tenner to try with a bikepump as back up.
Airman Compact Air Compressor - Screwfix.com, Where the Trade Buys
Dont waste your ££ ..I had two they replace the first one that never worked and the second over heated doing a fit ball (10psi)...
__________________
2000 Africa Twin
http://two-up-ona-twin.blogspot.com
Reply With Quote
  #11  
Old 22 Aug 2008
Chris Scott's Avatar
Super Moderator
Veteran HUBBer
 
Join Date: Jun 2000
Posts: 4,934
BMW must have looked at semi-liquid sealants, O-rings, diaphragms and a host of other ways to seal

I must say fixing the spokes outside the rim seems the obvious and easy way round it - or cast wheels of course (which I read somewhere are lighter on the t/l GS650 compared to the tubed 800 - could be wrong).

Lashings of B&Q silicon sealant under the rim tape sounds a good and reverseable bodge (as the best bodges are) but I wonder if there is some alloy corrosion (the vinegary smell) or outdoor temps ageing element in the silicon? Maybe some gasket compound would be better but whatever, it would be prone to lift off with centrifugal forces at speed unless the rim tape was a giant hose clip.

Anyway, Tubliss seemed to have engineered a neat solution. With that the centrifugal (which I didn't consider before) is broadly with you.

Thanks for the SP on the Airman pump - landfill it is then. Still Screwfix sounds like a good place for a wander and it's right next to Ikea for the Mrs - everyone wins!

Ch
Reply With Quote
  #12  
Old 22 Aug 2008
Registered Users
Veteran HUBBer
 
Join Date: Sep 2007
Location: Saudi Arabia
Posts: 173
Threewheelbonnie,
I'm with you on this, I would rather put my trust in the tyre companies than someone who has tried a bodge and got away with it. OK if you are in the middle of nowhere and you have to find a fix somehow and then get the correct repair done as soon as you can.
I know there are those that will say that they have been using this or that for ages on the road but you don't get any test data to say what the limits are and what kind of bikes that are used.
Cheers
Ian
Reply With Quote
  #13  
Old 22 Aug 2008
Registered Users
Veteran HUBBer
 
Join Date: Apr 2005
Location: Oxford UK
Posts: 2,116
Quote:
Originally Posted by Xander View Post
Dont waste your ££ ..I had two they replace the first one that never worked and the second over heated doing a fit ball (10psi)...
I bought something very similar from Woolies this time last year, stripped the casing off to reduce the size and used it loads of times (wife's car has "leaky" tyre) until it vanished a couple of months back. Noticed the other day that Woolies has them again for £6.99. If I buy one the original will turn up the next day!
Reply With Quote
  #14  
Old 22 Aug 2008
mollydog's Avatar
R.I.P.
Veteran HUBBer
 
Join Date: Aug 2003
Location: california
Posts: 3,824
Quote:
Originally Posted by Threewheelbonnie View Post
I don't think I like the DIY approach. Maybe it's the engineer in me but sealing air really needs the right surfaces and the right materials used in the right way. snip

Tyre repair gloop (basically water with suspended silicone blobs) is the equivalent of emptying the teapot down the sink. You'll think you blocked the plug hole, but come back in a few hours.....In a tyre repair the glue holds the plug (mechanical) while the rubber in compression does the sealing, hence it's a good seal.
Slime and Ride-On are designed to be used prophylactically. Have you had bad luck with Slime? I've used it for maybe ten years now. And though it does not always work 100% of the time, it has worked many times. In Baja, cactus can be a problem. Slime works pretty good at sealing these small punctures. Also, things like small staples and finishing nails too.

Slime, if nothing else, can slow down rapid air loss you can get with a tube. Not good when fully loaded on highway at 80 mph.

Quote:
Originally Posted by Threewheelbonnie View Post
I won't be doing this, but if you really do want to be the first (and lacking a tyre engineer to tell me otherwise), the pneumatic guy suggests keeping the rim tape. A least this will slow the flow rate if the silicone does open a leak path and will keep the seal on the spokes in compression and as static as possible.

Andy
Andy,
Not to denigrate tire engineers, but this really is just not that complex or hard to manage. Experience messing with it over the years can be a good way to know what works and what won't.


Patrick
__________________
Patrick passed Dec 2018. RIP Patrick!
Reply With Quote
  #15  
Old 22 Aug 2008
mollydog's Avatar
R.I.P.
Veteran HUBBer
 
Join Date: Aug 2003
Location: california
Posts: 3,824
Sealing rims is a great way to avoid having to pull wheels off and patch tubes. This has been done successfully for a long time. I first heard of it in about 1998 on the Yahoo Triumph Tiger list. A really S. African guy, really good mechanic and tour operator, sealed up the rims on his rental Tigers. Worked out well from what I understand.

Woody's Wheel Works can do it too (for US guys) and I'm sure any good wheel builder can seal up rims properly. I did mine myself. I have not finished the project yet. But will in near future, and will report back!

I have sealed the rims on my DR650 ... can't find the "after" pics..... I will be changing tires soon and will post the pics of what they look like with sealer on there. I did this mostly to avoid rapid air loss.

Most rims will hold the bead solid and do not need a tube to keep them
in place. Could a really hard hit unseat the bead? Regards my DR650, I don't know for sure.

The product I used is called:
3M Marine Adhesive Sealant 5200

Here is what 3M claim:
~~~~~~~~~~~~~~~~~
Watertight Bonding/Sealing of Fiberglass and Wood.

Ideal for Through-Hull and Deck Fittings and Deck to
Hull Joints.

Flexible

Cures in 7 days

~~~~~~~~~~~~~~~

I totally trust 3M, they make great products. This stuff is not some
ordinary Silicone sealer. It's tough as Hell and adheres to the Aluminum very very well. I tried to peel it off the spoke nipples after it
had cured for a few days (meant to cure a week) I couldn't get it off! Still flexible but sticks in place! This stuff is PERMANENT!

Regards spokes:
Once the sealer is on and fully cured, the spokes should not move, therefore may not ever need adjustment again. (theoretically ) Time will tell. My bike has only done 4000 miles since I sealed them and like I said, I have not finished the job yet and am still running a tube. Spokes all good so far.

I'm still running a tube. I did this initially to slow rapid air loss. At some point I will go tubeless and install a tubeless style valve stem and see how it holds. Other projects in the way at the moment. I have a spare set of wheels to "experiment" on.

Patrick
__________________
Patrick passed Dec 2018. RIP Patrick!
Reply With Quote
Reply


LinkBacks (?)
LinkBack to this Thread: https://www.horizonsunlimited.com/hubb/tech/sealing-spoke-wheels-for-tubeless-37278
Posted By For Type Date
Sealing spoked rims to run tubeless tyres | Adventure Motorcycling Handbook This thread Refback 26 Jan 2016 04:38
tubeless spoked motorcycle wheels This thread Refback 1 Oct 2015 07:08
Xt 660 Z Aftermarket - Σελίδα 70 This thread Refback 28 Sep 2015 14:58
Tubeless? This thread Refback 17 Jul 2013 14:44
Sealing spoked rims to run tubeless tyres (Yamaha Tenere) | Adventure Motorcycling Handbook This thread Refback 2 Sep 2012 14:56
Xt 660 Z Aftermarket - This thread Refback 10 Jun 2012 18:06
Spoked wheel tubeless conversion (Yamaha Tenere) | Adventure Motorcycling Handbook This thread Refback 24 Feb 2012 15:27

Currently Active Users Viewing This Thread: 4 (0 Registered Users and/or Members and 4 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Landy tubeless rims? roamingyak Equipping the Overland Vehicle 22 6 Oct 2007 21:50
Tubeless rims to rims? bikerfromsark Yamaha Tech 17 29 May 2007 17:06
Tubed tyres on tubeless rims? parkie Travellers' questions that don't fit anywhere else 5 5 Mar 2004 00:31
Tubed tyres on tubeless rims Andy Booth Equipment Reviews 6 19 Mar 2002 02:36
Rims and Oil Greg Yamaha Tech 2 13 Sep 2001 18:29

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

25 years of HU Events
Be sure to join us for this huge milestone!

ALL Dates subject to change.

2025 Confirmed Events:

Virginia: April 24-27
Queensland is back! May 2-5
Ecuador June 13-15
Germany Summer: May 29-June 1
CanWest: July 10-13
Switzerland: Date TBC
Ecuador: Date TBC
Romania: Date TBC
Austria: Sept. 11-14
California: September 18-21
France: September 19-21
Germany Autumn: Oct 30-Nov 2

Add yourself to the Updates List for each event!

Questions about an event? Ask here

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

Adventurous Bikers – We've got all your Hygiene & Protection needs SORTED! Powdered Hair & Body Wash, Moisturising Cream Insect Repellent, and Moisturising Cream Sunscreen SPF50. ESSENTIAL | CONVENIENT | FUNCTIONAL.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 14:39.