|
14 Jun 2005
|
Registered Users
Veteran HUBBer
|
|
Join Date: Aug 2003
Location: Perth
Posts: 263
|
|
transalp 600 stoppers
I would like to make my TA better at stopping, I've added a steel line and changed the fluid and got ebc pads. Is there a cheap way of adding another caliper and disk etc,
obvious is the 650 version but second hand there arent any parts about. Any other honda twin disk front wheel that may fit I can get from a breakers.
I am not after major work, just a quick fix if there is one, otherwise I'll buy a newer bike when the time comes.
|
14 Jun 2005
|
Contributing Member
Veteran HUBBer
|
|
Join Date: May 2002
Posts: 182
|
|
not sure about the method of adding an extra caliper but to get a wheel with 2 disks that would fit, why not try the later versions of the 600cc Transalp? I have a 97 and a 99 and they both have twin disks (and no you can't have one of my front wheels )
------------------
My website
Africa Trip web journal
|
15 Jun 2005
|
|
Contributing Member
Veteran HUBBer
|
|
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
|
|
Quote:
Originally posted by PaulJ:
not sure about the method of adding an extra caliper but to get a wheel with 2 disks that would fit, why not try the later versions of the 600cc Transalp? I have a 97 and a 99 and they both have twin disks (and no you can't have one of my front wheels )
|
No use getting the wheel alone, you need both forks to have a caliper mount.....
Easiest way is a complete front end swap, using forks of the same diameter, same approximate length & same size wheel.
Africa twin may the way to go? Too long & you'll slow the steering down, too short & you'll speed up the steering, suffer a slight loss of stability & suffer reduced ground clearance.
The other way that may be cheaper & easier is to find a larger diameter Honda disc that has the same mounting points on the wheel hub. Larger diameter will allow the fitment of a 4 pot caliper & no need for another brake line. Stick with the stock m/cyl until you've tried it out - smaller can be better (1/2" is best for one 4 pot). You'll also need to fabricate a caliper carrier to mate the caliper to the forks.
GSX-R Niisin calipers are good & readily available, as are the pads.
I fitted a 320mm Exup disc to an FZR600 front wheel, mated to a Nissin 4 pot, all on GSX1100 forks & all fitted to a DR600. Worked fine, bit too fierce, one finger braking.
|
15 Jun 2005
|
Registered Users
Veteran HUBBer
|
|
Join Date: Aug 2003
Location: Perth
Posts: 263
|
|
thanks for the info, AT route sounds best from a breakers. If not think I'll be looking for a v strom
|
15 Jun 2005
|
Registered Users
HUBB regular
|
|
Join Date: Jul 2001
Location: Norway
Posts: 68
|
|
The AT have 43mm and TA 41mm. So you need the triple clamp also. And only the lower triple clamp from AT RD04/RD03 fits.
|
15 Jun 2005
|
|
Registered Users
Veteran HUBBer
|
|
Join Date: Jun 2000
Location: GOC
Posts: 3,335
|
|
I read somewhere that a German put a Honda XR600 forks/wheel etc onto his TA. No idea of precise sizes etc.
ChrisB
------------------
TheBrightStuffDotCom
|
15 Jun 2005
|
|
Contributing Member
Veteran HUBBer
|
|
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
|
|
Quote:
Originally posted by chris:
I read somewhere that a German put a Honda XR600 forks/wheel etc onto his TA. No idea of precise sizes etc.
ChrisB
|
He wants a twin disc set up, XR's are single disc I believe?
|
16 Jun 2005
|
|
Registered Users
HUBB regular
|
|
Join Date: Oct 2003
Location: Fife, Scotland
Posts: 96
|
|
The only way has to be the later 600 front end unless you go the larger disc or different (more pots) caliper route. All are expensive, but are you really sure you need it? Mine were always weak in the brakes department, but in reality they did work, and that 90/90 front tyre has enough to cope with as it is. I liked the braking for off road and slimy tarmac - much more forgiving! By the way, the EBC pads aren't the best.
Stig
__________________
Tall men see everyone else's bald patch but their own.......
|
8 Feb 2006
|
|
Contributing Member
Veteran HUBBer
|
|
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,673
|
|
Quote:
Originally posted by Steve Pickford:
<BLOCKQUOTE><font size="1" face="">quote:</font><HR><font face="" size="2">Originally posted by chris:
I read somewhere that a German put a Honda XR600 forks/wheel etc onto his TA. No idea of precise sizes etc.
ChrisB
|
He wants a twin disc set up, XR's are single disc I believe?</font><HR></BLOCKQUOTE>
yes, all XR's are single disc. What size is your disc ?? if its a 220 , putting a 320 will help an great deal. If its already a 320 then changing the master cylinder can inprove the braking by increasing the pressure. The only downside to this is that you lose allot of the "feel".
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
|
8 Feb 2006
|
Registered Users
Veteran HUBBer
|
|
Join Date: Oct 2000
Location: Nantes, France
Posts: 392
|
|
Back in the 1980s, the TA was lighter and more serious about its off-road pretentions. One disk was enough.
For touring - maybe two-up - with luggage, it's another matter. I put on an aftermarket disk (EBC I think), as well as the steel lines. This helped a lot.
Look here for options:
http://www.ta-deti.de/ta/rotors.html#front
Fiddling with wrong-size calipers from other bikes is too much hassle - bodging brakes, now that's just not a good idea is it?
Change the disk or change the whole front end for a late '90s double disk model. They are your options.
Simon
__________________
Simon Kennedy
Around the world 2000-2004, on a 1993 Honda Transalp
|
25 Feb 2006
|
Registered Users
Veteran HUBBer
|
|
Join Date: Aug 2003
Location: Perth
Posts: 263
|
|
Just incase anyone is interested in this thread, sintered brake pads did improve the braking. although they wear out the discs qicker, the disks aren't expensive anyway.
|
Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Next HU Events
ALL Dates subject to change.
2025 Confirmed Events:
- Virginia: April 24-27 2025
- Queensland is back! May 2-4 2025
- Germany Summer: May 29-June 1 2025
- CanWest: July 10-13 2025
- Switzerland: Date TBC
- Ecuador: Date TBC
- Romania: Date TBC
- Austria: Sept. 11-14
- California: September 18-21
- France: September 19-21 2025
- Germany Autumn: Oct 30-Nov 2 2025
Add yourself to the Updates List for each event!
Questions about an event? Ask here
See all event details
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...
2020 Edition of Chris Scott's Adventure Motorcycling Handbook.
"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)
Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.
Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.
Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!
What others say about HU...
"This site is the BIBLE for international bike travelers." Greg, Australia
"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK
"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia
"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA
"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada
"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa
"This is the answer to all my questions." Haydn, Australia
"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany
Lots more comments here!
Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook
"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.
Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!
New to Horizons Unlimited?
New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!
Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.
Read more about Grant & Susan's story
Membership - help keep us going!
Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.
You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.
|
|
|