Horizons Unlimited - The HUBB

Horizons Unlimited - The HUBB (https://www.horizonsunlimited.com/hubb/)
-   BMW Tech (https://www.horizonsunlimited.com/hubb/bmw-tech/)
-   -   Front forks diving when braking slowly (https://www.horizonsunlimited.com/hubb/bmw-tech/front-forks-diving-when-braking-8041)

llanelli 23 Jun 2004 09:49

Front forks diving when braking slowly
 
When I am braking when travelling slowly, I get a slight diving sensation then release , then diving again,(only slightly). Someone said my springs are gone. Any ideas. I got the oil replaced!

Thanks

Grant Johnson 25 Jun 2004 12:23

Which model/year/mileage?

But note that all BMW's are soft in the front end, mostly due to the long travel forks, and some dive is the nature of the beast.

Which oil/weight?

Progressive Suspension makes excellent fork springs for most Beemers. Recommended.



------------------
Grant Johnson

Seek, and ye shall find.

------------------------

One world, Two wheels.
www.HorizonsUnlimited.com

bryan 30 Jun 2004 00:35

can recommend WP(white power) aswell

Grant Johnson 30 Jun 2004 04:51

Rereading the question, it actually sounds like the brake disk is warped. That could account for an on-off-on sensation.

llanelli 2 Jul 2004 11:52

It is an F650GS Dakar 2003.

If it was the disc, wouldn't I feel a vibration when braking at every speed?

Many thanks
Andrew

Grant Johnson 2 Jul 2004 12:02

Not necessarily - if it's only slightly out, you might not. Higher speed makes the pulses so close together they blend.

COULD also be a badly glazed spot, or a spot that's got oil on it at some time, which would give the same feeling.

Get it checked by a shop, they should be able to tell you easily.


------------------
Grant Johnson

Seek, and ye shall find.

------------------------

One world, Two wheels.
www.HorizonsUnlimited.com

ekaphoto 2 Jul 2004 12:23

Another possability is that your springs are too soft for the weight on the bike. Most bikes are set up for people 180-190 max. An average person plus extra gear can go over that easy. The springs may also be worn out if they are very old. Just a couple of things to think about if the brake rotor is not the problem.

------------------
John

Grant Johnson 8 Jul 2004 07:52

Here's an interesting article on possible causes, problems. It's for cars, so not perfectly applicable, but good nevertheless. I think the basic info is excellent. Very interesting reading about the break-in procedure for disks and pads.


All times are GMT +1. The time now is 06:58.


vB.Sponsors