Sagging Door Gasket
 

The drivers door of my Puma Def(which is only 2 yrs old)is starting to suffer from a sagging top section door gasket. Has anyone found an effective way of curing this 'old LR problem':taz:?

The actual "rubber" that fits onto the main bodywork?


Try squirting something like tigerseal (that's body panel sealer) into the "gap", the refitting it where it should and closing the door. leave it overnight for the sealer to set, and it'll stay in place.

The seals have a metal strip inside them that should hold it in place. you could remove the seal, and crimp it all the way along with some pliers, and refit.

cut sag out- super glue