![]() |
Wood working
OK I know it's a bike club, and it's about travel. This is so far away from the idea of what this place is for. So if it's not a good idea someone tell me.
I've just get my hand's on a load of wood working kit. To day I've been out using it. Have to soon, put in some more power point's. I know about load verses cable capacity. In this instance, only one pice of machinery will be on at one time. So the load is only going to be as large and the biggest pice of equipment. John933 |
Correct. Put a 13A trip on a 16A cable with two, three or 97 plugs it's all really the same bar a few bits of extra load from internal bits. Plug the 12A saw in and it's still fine. Boil the kettle while the saws running and the trip will go. The trick is to make sure the joints, cable and trip match which is where a proper sparkie will test with his mega to prove the trip will save you even if the faults at the worst socket.
I have a deal with wood. I don't touch it, it doesn't split. Andy |
All times are GMT +1. The time now is 00:15. |