hepco becker rack
 

Hi again mates,i got a problem,i bought a hepco becker rack for my xt 600e and i coudn't fit it well,and i'm desperate looking for help,if you have some photos or info about mounting this rack it would be great.

The right side rack goes mounted in the exhaust side of the bike and there's a bolt attached to the frame and the exhaust so,where it is located the rack,between the frame bike and the exhaust or.....i don't know,please help...........

Hi XT Performer,

I have a Hepco & Becker rack fitted to a 1991 XT600e, so may be able yo help.

Unfortunatly I don't have a digi camera though.

On the exhaust side, the front mounting point attaches to the bracket just behind the pillion foot rest. The rear-most mounting ppoint connects to the same part of the rear sub-frame as the left side rack, the third mounting point attaches to a different point of the rear sub-frame to the left side.

My bike no longer has the original silencer, which braced the rear sub frame. I have had some one off supports made to reinforce this area, so any spacers etc used on my bike may be different for yours.

I fitted it a couple of years ago now, so can't remember for sure, but I think I had to replace some of the bolts for longer ones.

Hope this isn't too confusing

Mark