|
New Owner Intro (49L) + New Questions [Rebuild, Brakes, Suspension]
Hey all,
Last week, I finally picked up my 1985 XT600 (49L, manufacturing date of 12/'84) - I bought it from a fellow mid-20's rider. The bike had been in his family for well over 10 years, and he actually learned on the bike. I had some hiccups registering this expired/out-of-state bike, but I'm happy to say that it's finally registered in California! bier With 15.5k miles or so on the odometer, she's in surprisingly decent shape for a 30 year old motorcycle; the seat is the only area that looks terrible. I am surprisingly excited about my XT600, especially having just sold my street bike ('09 Monster 696) - I am loving this bike on San Francisco's bumpy roads. However, due to a wrist injury and not being able to ride for the next 5-6 weeks, I have decided to work on rebuilding the motor as well as improving areas that could use them. Please provide your advice on the following areas that I want to improve, I've spent at least 10-15 hours reading but I still have much to learn, since most of the mods apply to the later XT's:
Having and sharing some tools with friends, I also bought:
Here are things I would like to add, but it's not a priority:
Finally, thanks so much for reading. For most of the repairs and mods, my friend(s) and I will be tackling ourselves. We have most of the tools and have access to a friend's shop after-hours. I'm not necessarily too worried about "labor" since we'll be doing the work, it's more about getting the results I need out of my suspension and brakes and the money I'll be spending on those components (whether it's a new front-end, or parts for my stock suspension). |
First thing, throw the clymer manual away, they are terrible and wrong. Get a genuine yamaha manual, they are available on line for the asking.
Before jumping into rebuilding the engine, first do some tests. 15K miles is nothing. DO a compression test. Normal is 150 to 170lbs. My 86 xt has about the same mileage and measures 170 lbs. I recently freshened up mine by stopping all the oil leaks, new seals etc. You will probably have to take the rocker box off, clean and reseal it using Yamabond sealer. While apart look at the camshaft for wear and deep scratches, look at the rocker arm faces too. If the oil has been changed and filter changed the cam will be fine. After reassembling the rocker box, you MUST set the valve clearance. All of this is in the Yamaha manual as to disassembly and valve settings. If you have low compression, adjust the valves first. If still low, squirt some oil in the cylinder then do another compression test. If compression is better then the rings/piston/cylinder may need attention. If no change then the valves may need to be replaced. Replacing and lapping the valves is a job for a shop, just take them the head after removing it. You cannot grind the valves other than lapping them in and it may be all they need. Good luck, ask for advice here and other xt600 forums. Plenty of folks to help you.:clap::clap: |
See below in red
Quote:
|
| All times are GMT +1. The time now is 18:24. |