wont start
 

hi all, problem is...went to the xt600e yesterday, tried to start it, everything sounding as it should, starter motor spinning engine over, not started tho...eventually battery went flat so charged it up over night..put battery on this afternoon and im only getting a clicking noise from the solonoid everytime i press the start button..lights, horn etc all working ok... any ideas :confused1:

Try bridging the contacts on the solenoid to make the connection.
If it turns over check your leads to/from solenoid.
Got a spark?
Will it bump start?
Can you get a mate to give you a tow start see if you can get it running?
You def have fuel right?
What year is it?
Good luck. Dave.

Remove the seat and fuel tank and check if the cables that connect to the ignition coil are well placed!

Also, if the fuel line that goes from the fuel tank to the carburetor is letting air in, no amount of anything else will allow the bike to start...



Good Luck!

Kill switch "off"?

Startermotor wont spin with killswitch in "off" position.