XT 600E 1992 please help
 

Hello guyz, please help me my problem on XT 600E.When I ride slowly i hear a weak knocking.Knocking only ride and when I press the clutch and knocking all the time.It's okay on the spot.Please check video and help me, thank you.
https://www.youtube.com/watch?v=6KeGZFzCaOY

It's a bit hard to tell from the video due to the wind noise, but my first thoughts are that maybe the drivechain is overtightened? Basically check the slack with someone sitting on the bike, move the bike so the wheels rotate 1/4 turn check again, rotate another 1/4 turn check again, etc until the wheels have rotated one full turn.
Also check chain for tight sections. Jack bike & spin back wheel.


Bob

Chain is new.It has done both old and new.I've already tried everything. The chain is set according to the manual. Please help me . :frown::frown::frown::frown::frown::frown:

Set bike on a paddock stand(or similar) and do another recording around engine when running.

I'll try something better-than-nothing stuff - like how I would try to deal with such thing..
First step would be engine check but according to your description I guess it's ok and must be excluded as a reason.
Than, we've got two possible reasons - moving part which is out of order or steady part became non-steady.
With lifting options you've got to simulate riding for maybe each moving part.
NB: always be aware how complete is extent of this simulations over real riding conditions. mostly it's about suspension but still important for other parts as well.
checking steady parts might be somehow easy but there still might be need of stand and running engine / wheel and carefulness, accordingly.
also, don't forget about third possibility - foreign object jammed somewhere, e.g. forests use to provide us with such challenges : )

Hello, the engine is okey. Check out my new video. Engine off and ride. Where is the problem?Please help.Thank you.
https://www.youtube.com/watch?v=FPQgOU3FqcM

Yes very nice wind, is it coming from north or south?:clap: Try to raise bike in the back so you can start up and run bike standing still. For me it sound like brake pads are gone? if you turn off engine when riding do you have same noise? check also where chain meets frame, maybe chainprotector is broken. I will also advice you to NOT ride the bike before you find out where noise is coming from, you can end up with much more damage.

If I try it on the spot, that's good. Yeah, if I turned off the engine at the ride it did exactly the same. The string is new and properly set.

Ok good, brake pads checked? and check part nr 9 https://www.yamahasportsplaza.com/oe...8bd24/rear-arm

Brake inserts were changed last year, while I was feeling the smell of rubber for a while. Tires well. Part 9 is an okey.

Well like i told before, get the bike up in the air and spin the wheels, maybe wheel bearings?

So today he tried to ride again because there was silence on the racks. And it's the front brake pad - the stalk. What can I do? Thank you.

They are stuck? In that case follow this video https://www.youtube.com/watch?v=tUyGTvLDrt4 If this doesnt help you need to check out video for overhaul of the piston, maybe change if they are rusted. You will se when you check this, piston moves out/in equal when press the brake.

Just when I press the front brake it still keeps clicking. And to do that, too, a fine whistle. What more can it do? I have not yet figured this out, but I do not want to break the power so I can not save it.

Hello.So the problem solved was finally done by the tachometer. I wanted to let him go, but I did not feel like it was going to be all over the photo. But when I broke up so it stopped as much as possible? How could this be done? Well thank you . A photo: http://i68.tinypic.com/vfdrk.jpg

Remove the wheel and put the tacho back correct, its to far back. http://www.moto-choice.com/en/Bike-R...ing-charm.html

So, also, stop the wounding and the sound? But why did it click and how could it turn around? Does that mean it's not over yet?And what did it really do? Where could be a mistake?

So yesterday it was good and today I felt it again. When I was throwing a few meters, it was good. What is the sound of the tachometer? Will it just put it in the right position or need a new strand? Well thank you.

So now I put it in the position where it was supposed to go, but after about 3 km it started again, so I disconnected the tachometer in the worm and passed about 10-15 km and it was quiet. The bowden is quite destroyed when I hope it can I can see that the sound of the car was not enough to get rid of the gasoline, because I noticed it after I went out to ride that the garage was such a shit that I would not needlessly strast.

ecause I'm still making ten sounds on the video just when I disconnected the tachometer cable when it stopped, it did not do that? Well thank you.

Man... I'm sorry but your English is so broken it's difficult to understand. After trying to read this thread my brains hurt... :hang:

Try harder to explain everything, what happened after what and so on, maybe then someone can understand. Sorry.

Ye well its most likely broken, buy new tacho gear. If you remove it and spinn wheel you will know if thats the problem.

If I disconnected this work from the speedometer the sound stopped http://www.motocomponents.cz/obrazky...9-original.jpg . If I give a new fix problem? What could knocking?

Ok yes buy new, if sound is gone no knocking?

Well, when I disconnected the sound stopped.Tomorrow comes new. Is it one that I often use in a speedometer?

No, never changed mine. Add oil, if rust it may not last long.

this must be the most hilarious thread ive read in a while anywhere :)

keep them coming X5

bier

What?

Dont mind the comments! I dont see any reason to make fun of people that have little knowledge of English writing, try use google translate from russian or other language in that part of the world. It for sure make no sense when i try translate to my language, i bet he tries the best he can..

So today I've changed for a new 50km and so far.

So everything ok?:thumbup1:

For now yes.:cool: :eek: :D .

Great, good you had this fixed:thumbup1: Happy riding:scooter:

Awesome, glad Xtrock got you sorted! :thumbup1:

Thanks