Horizons Unlimited - The HUBB

Horizons Unlimited - The HUBB (https://www.horizonsunlimited.com/hubb/)
-   Yamaha Tech (https://www.horizonsunlimited.com/hubb/yamaha-tech/)
-   -   xt600e parts needed if anyone has any ? (https://www.horizonsunlimited.com/hubb/yamaha-tech/xt600e-parts-needed-if-anyone-43769)

widget2k4 28 Jun 2009 20:05

xt600e parts needed if anyone has any ?
 
i need a few bits and pieces to finish my bike and get it through an mot if anyone has them lying about and wants to make some beer tokens ?

i need -
the engine guard that goes under the engine.
speedo drive that goes on the front wheel.
rear footrests
exhaust heat shield (rear)
flasher unit
rear engine mount nut & bolt
could also do with a front headlight cowl
there is also something missing that bolts onto the tank on the top but i have no idea what,all i know is there's a bolt hole and a big gap between the tank and the handlebars.
if anyone has any of these then please post on here or pm me
thank you

wolfzero 28 Jun 2009 20:33

Quote:

Originally Posted by widget2k4 (Post 247978)
exhaust heat shield (rear)
flasher unit
rear engine mount nut & bolt
could also do with a front headlight cowl
there is also something missing that bolts onto the tank on the top but i have no idea what,all i know is there's a bolt hole and a big gap between the tank and the handlebars.

i doubt the exhaust heat shield will be an mot failure, flasher unit is a standard one unless your using led indicators.
nut and bolt is just that so should be easily sourced.
the bolt hole on the tank is for a plastic infill piece that covers the oil filler cap also not a mot requirement and is a pain especially as your gonna need to keep an eye on your oil level after a rebuild.
i think i might have a white h/light cowl and a speedo drive i'm off to the pub :thumbup1: so i'll have a proper look tomorrow :rolleyes2:

widget2k4 28 Jun 2009 20:53

Excellent mate.
Was just looking for the other bits to finish it off but would really appreciate any of the bits,I thought the proper bolt would be better as they looked like high tensile bolts.

xtorange 29 Jun 2009 13:24

Got a muffler heat shield if you really want....

BlackDogZulu 29 Jun 2009 15:09

Quote:

Originally Posted by wolfzero (Post 247980)
the bolt hole on the tank is for a plastic infill piece that covers the oil filler cap also not a mot requirement and is a pain especially as your gonna need to keep an eye on your oil level after a rebuild.

Yup - took mine off after a service when I was checking the oil every day, and it was a royal pain to unbolt it every time. I haven't missed it. In fact, the bike looks normal to me now without that piece and the tank 'air scoops' (which fell off and were never replaced).

Funny, though - that filler piece between the tank and the headstock looks about the best-made bit of plastic on the whole bike.

widget2k4 29 Jun 2009 16:48

Quote:

Originally Posted by xtorange (Post 248048)
Got a muffler heat shield if you really want....

How much for it mate?

widget2k4 29 Jun 2009 21:18

no need for any more bits thanks

someone managed to get me everything on the list :)


All times are GMT +1. The time now is 21:03.


vB.Sponsors