The overhaul of the bike is now almost finished:
-Changed alternator brushes
-Changed diodeboard (Motorrad)
-Checked and cleaned starter
-Changed timing chain with tensioner
-Changed pushrod tube rubbers
-Changed rings
-Changed two broken needlebearings
-Cleaned and checked the tops/valves
-Overhauled the carbs
-Changed clutch
-Changed oilseals in gearbox (in and out)
-Changed oilseal cardan
-Inspected driveshaft
-Changed leaky fuel-taps
-Installed fuel filters
The last modifications on the baggagesystem and rearframe will be done next week..
Grant Johnson wrote:
"Put fresh heatsink compound on the electronic box under the tank that has the aluminium finned heatsink on it - this can overheat and fry if the compound is old."
The electronic box is attached to the heatsink with some kind of rivets. To replace the heatsink compound I have to drill out the rivets!! Maybe we don't have the same unit?
Thanks again,
AliBaba - Leaving soon...
|