r100gs oil pressure
I have a well travelled 1991 r100g with 95000 miles on the clock. The oil presure light has started coming on after the bike has done a few miles. it is only on up to around 1500-2000rpm then it goes out. apart from that the bike runs fine and no funny noises, at least non that were not there before. This has only started happening after a recent oil and filter change, but that could just be coincidence. just to be sure, i have changed the oil again and checked the filter is fitted correctly but everything seens fine. i also changed the pressure switch just in case it was a faulty switch. the light is still coming on. any suggestions on what to do next, short of stripping the engine?
grateful for any suggestions
|