Quote:
Originally Posted by bhulstedt
A few days ago I was riding and the Bike suddenly stopped. No Spark what so ever. From reading several blogs I suspect that my problem may be the Ignition control module.
|
The impulse module.=
Second Hall Effect Sensor for an Airhead
There is a link there to flashes site on testing the impulse module ...
But - the easy way to test ... where the impulse module connects to the control module near the alternator - dissconnect the impulse module, short the centre connector (that goes to the control module) to ground .. if you get a spark then the control module, coil, HT lead, spark plugs are all working. Always best to test insitue - saves dissassembly, and test everything inbetween (wiring etc).
The clutch and netral switches do no effect the ignition circuit - they effect the starter motor circuit .. red herring.
-------------------------
You should start a seperate thread - makes it easier for others to find the information on that subject.
__________________
---
Regards Frank Warner
motorcycles BMW R80 G/S 1981, BMW K11LT 1993, BMW K75 G/S
|