IVECO 40.10 (35.10) tracking help needed
Hello all.
have recently fitted replacement steering rack on truck and obviously decided logical time to check and correct any tracking issues on front.
'toe-in' or 'toe-out' was easy enough to self check and adjust.
However, it appears (according to my spirit level) that the 'camber' is out, and actually out by quite a lot. But i can see no logical way to adjust.
have checked our faithful 'workshop manual' which certainly references checking of camber but does not give explanation for adjusting.
There are 2 (a top n a bottom arm) which ix firmly to the chasis slightly back from center of wheel, the manual references needing to shim these either in or out but my logic is that this will only adjust the 'caster'.
Beyond that my other though was perhaps the torsion bar has a bush which may require replacement (could this throw my camber off ?)
Anybody got any ideas ? Bruce is this something you've come across ?
Phil.
|