|
|
18 Sep 2006
|
Registered Users
Veteran HUBBer
|
|
Join Date: Jan 2003
Location: Luz, Haute Pyrenees
Posts: 112
|
|
Sand ladders / tyre pressures
Hi,
I expect this has already been discussed here several times but I'm about to set off to Tunisia and Libya in a 300 Tdi, 130 Quadtec 4. I'm on BFG All Terrains, carrying a motorbike and some tools and stuff in the back.
1). would you take ali psp style sand ladders or waffle boards ? (I've never used either as all my desert driving has been on a motorbike !
2). what is lowest pressure you can run a BFG AT on in the sand ?
I've got a Viair on boad compressor with a 2.5gallon tank. It doesn't seem to be air tight - pressure drops over a few days. Does anybody have any tips on how to stop this ?
thanks,
Simon
|
19 Sep 2006
|
Registered Users
Veteran HUBBer
|
|
Join Date: Nov 2004
Location: USA
Posts: 992
|
|
Theoretically you can go down to zero psi.
Try 14, try 12, etc. You just want a big fat foorprint.
Avoid tight turns at speed as you can roll the bead off.
Air back up after hitting the road and before high speeds.
A valve core tool makes airing down and up quicker.
Remove the fittings, re-install with teflon tape. If you have a blow-off/dump valve, there may be some junk in it. Remove, clean, etc if needed.
Spray soapy water on all fittings and check them as you would an inner tube.
|
19 Sep 2006
|
Registered Users
Veteran HUBBer
|
|
Join Date: Feb 2004
Location: UK
Posts: 1,232
|
|
looking at your probablt all up weight I would say go for heavy duty waffle boards, you can get them on ebay for about 80 quid, I'm not sure ally ladders will be strong enough for you.
running at probably over 3 tons in landcruisers this year on continental sand tyres the lowest we had to air down to was about 20psi, and with the weight we were carrying they looked pretty damn flat at that. I would tend to air down 50%or so initially , then 5-10 psi steps after that if needed, you will quickly get a feel for what is right (once you get sick of digging!).
(we were fully inflated at 45 psi on the rears)
__________________
1990 Landcruiser H60. Full rebuild completed 2014
|
19 Sep 2006
|
|
Contributing Member
Veteran HUBBer
|
|
Join Date: Mar 2004
Location: Saltspring Island,Canada/Poole,UK
Posts: 1,081
|
|
Hi Simon, hows it going ?
Yep, as Moggy says it depends on the 130's weight with the tyre pressures - run the highest pressure you can get by with - this keeps the sidewalls cooler - drop a few psi at a time - I would avoid dropping so much that the tyre looks too flat - or as mentioned theres a good chance the bead will pop during a turn.
air up over any rock fields too - not just on asphalt - its easy to get lazy and rip out a sidewall - good as BFG's are, they havent got indestructible sidewalls and they will rip out over sharp stones.
a good routine to get into is to check the tyres cold every morning so you start the day with even flotation. (id start the day with 20psi in the dunes with the 90 and drop from there - again what works for the 130)
Go with the thick 50mm red (I think) waffle boards with the 130, they work a treat, you can also put some rope handles half way along the sides - which makes it easy to carry all 4 of them !!!
I got mine from Fibregrid - shop around though.
Have a good trip, say hi to Susan !!!
Cheers
Grif
ps I ended up selling the KTM and am now Married and living in Canada !!!
Last edited by Gipper; 19 Sep 2006 at 06:52.
|
19 Sep 2006
|
Registered Users
Veteran HUBBer
|
|
Join Date: May 2006
Location: Bribie Island Australia
Posts: 678
|
|
I'm going to throw a spoke into the wheel about tyre pressures, back in the early 1980s I worked for Isuzu Trucks and had the job of demonstrating a 4x4 fire truck to the rural brigades in Australia.
The Japanese engineers wanted everything to be just right for the demos as there were about 500 trucks over 3 years. I was about to drop the tyre pressures for the sand demo when I was told in no uncertain terms to stop. The tyre engineers at Isuzu had spent a good deal of time testing pressures, rolling resistance, footprint of tyre, etc etc. There conclusion was that in sand (or snow) its the approach angle of the tyre over the sand that counts, having a wider, softer tyre decreased the approach angle and made it harder to drive forward. Having wider tyres was better but always operated at normal pressures for the weight of the vehicle.
Over the years I've always followed their mantra, and (I now live on an island made of sand) never been let down and have on numerous occasions ending up using my '58 Landy to pull out the $80k 'cruisers, Rangies and one Hummer, all with their tyre pressures dropped so low that they risked breaking the bead.
|
19 Sep 2006
|
|
Contributing Member
Veteran HUBBer
|
|
Join Date: Mar 2004
Location: Saltspring Island,Canada/Poole,UK
Posts: 1,081
|
|
Hi Roger,
Thats a spoke alright !!! - having bogged down in sand at road pressures a good few times I have to disagree - driving into a soft patch of sand with 35psi in the tyres (fairly wide BFG 265's) results in bogging down - the only way out is to air down (and dig)
As you have mentioned - airing down reduces the tyres approach angle - therefore giving LESS resistance than at road pressure - the tyre shape is no longer round - it is flattened at the bottom - as the tyre rotates it is constantly flexing to mould to the shape of the ground - have a think about that....
This combined with the improved flotation that dropping pressure creates - a longer footprint = reduced ground pressure= less chance of getting bogged.
Its not about having the widest tyre - its about having the tallest tyre you can run with your gearing - creating the longest (greatest area) footprint.
I would also say that short, wide 'Carlos Fandango' tyres at road pressures, create a lot of resistance in sand - a small footprint with a wide, steep approach angle.
Just My opinion
Your '58 Rover has got good gearing and its relatively light - so it will perform well in sand - is it an 88 or 107 ?
Cheers
Grif
|
19 Sep 2006
|
Registered Users
Veteran HUBBer
|
|
Join Date: Feb 2004
Location: UK
Posts: 1,232
|
|
Got to agree with gipper there. It can't be coincidence that when you get stuck at road presures if you air down you get out!!
in a suzuki sj413 I never had to air down, but it weighed about a 3rd of what we were running the cruisers at, which is probably about double what your 88 weighs!
__________________
1990 Landcruiser H60. Full rebuild completed 2014
|
20 Sep 2006
|
Gold Member
Veteran HUBBer
|
|
Join Date: Sep 2006
Location: N.Yorkshire
Posts: 336
|
|
tyre pressures
I wouldn't advocate going below 16psi, it wont help the footprint much by going lower and you will possibly run the tyre off the rim.
Hint, attach 10' lengths of lightweight rope between the rear x member and the boards, that way when you get moving you can carry on till you reach safe ground...
__________________
Harley Davidsons,
The most effective way of turning petrol into noise without the side-effect of horsepower
|
20 Sep 2006
|
Registered Users
Veteran HUBBer
|
|
Join Date: May 2006
Location: Bribie Island Australia
Posts: 678
|
|
Its a shorty, non top, but I often drag a trailer along the beach as well, record so far is 10 kids plus me, plus trailer full of camping gear. Its got 750R16s on it with a tyre diameter of 800mm, whereas my Hilux has only got 700mm diamter tyres, which are wider but the Hilux always struggles in the soft sand in comparison to the Landy. The Hilux has never managed to tow a trailer onto the beach without some help to get it onto the hard sand near the waters edge.
|
20 Sep 2006
|
Registered Users
Veteran HUBBer
|
|
Join Date: Apr 2001
Location: Scotland
Posts: 775
|
|
Quote:
Originally Posted by RogerM
The tyre engineers at Isuzu had spent a good deal of time testing pressures, rolling resistance, footprint of tyre, etc etc. There conclusion was that in sand (or snow) its the approach angle of the tyre over the sand that counts, having a wider, softer tyre decreased the approach angle and made it harder to drive forward. Having wider tyres was better but always operated at normal pressures for the weight of the vehicle.
|
Roger,
Do you know this saying:
"In theory, there is no difference between theory and practice. In practice, there is a big difference"
__________________
----------------
Roman (UK)
|
22 Sep 2006
|
Registered Users
Veteran HUBBer
|
|
Join Date: Jan 2003
Location: Luz, Haute Pyrenees
Posts: 112
|
|
thanks
Hi everybody,
And thanks for all the advice. Sounds like waffle boards would be good then. I need the quick because I'm going to Tunisia and Libya next week ! I'm in London - I think there is a place called Scorpion Racing that sells that up near the North Circular ?
I've got a Viair on board air system so inflating / deflating will be simple enough.
Shame you sold Susan's KTM Gipper ! home it has a good home. We use the 130 as a back up vehicle of long distance desert rallies - the bike in the back is a 450 KTM rally bike.
I've always found that reducing airpressure helps a huge amount. On a motorbike, using Michelin Desert tyres you can run almost empty of air and just about float over sand.
cheers,
Simon
|
22 Sep 2006
|
Registered Users
Veteran HUBBer
|
|
Join Date: Jan 2004
Location: Manchester, UK
Posts: 456
|
|
I'm sure Scorpion do them. If you run out of time, get some heavy duty rubber floormats (the ones threaded together) from a hardware place - work OK in a pinch. Unless you're overloaded, airing down will get you out 90% of the time.
|
22 Sep 2006
|
Registered Users
Veteran HUBBer
|
|
Join Date: Jan 2004
Location: Manchester, UK
Posts: 456
|
|
Hi Gipper
"driving into a soft patch of sand with 35psi in the tyres (fairly wide BFG 265's) results in bogging down - the only way out is to air down (and dig)"
Did you ever try those BFG 265/85's you were thinking about ?
|
22 Sep 2006
|
Registered Users
Veteran HUBBer
|
|
Join Date: Mar 2001
Posts: 921
|
|
Just not necessary
Waffle boards/sand ladders are not necessary. Good compressor thus no hesitation in lowering to correct pressure is the key. I, nor anyone on my team has EVER needed sand ladders! Leave them behind and save cash and weight - you will, though, look slightly less cool at Sainsburys!
Lowering the pressure on strong sidewall tyres should barely affect the width - it's the footprint length increase that is key.
Roger M is not correct in his assertion that tyre pressure makes no difference -sorry! Never under-estimate driver (in)competence as a major factor in getting stuck.
On a final point, slow leakage from a compressor chamber cylinder is nothing new (see the one in your workshop that also needs to briefly top up after having been left for a while). Are you really in such a rush to re-inflate each time - perhaps CTIS is what you need (at about EUR2500 for a standard 4wd)?
Sam.
|
23 Sep 2006
|
Registered Users
Veteran HUBBer
|
|
Join Date: Nov 2004
Location: USA
Posts: 992
|
|
If you plan on getting in some deep do-do , go ahead and mount a proper size winch.
|
Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...
2020 Edition of Chris Scott's Adventure Motorcycling Handbook.
"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)
Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.
Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.
Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!
What others say about HU...
"This site is the BIBLE for international bike travelers." Greg, Australia
"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK
"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia
"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA
"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada
"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa
"This is the answer to all my questions." Haydn, Australia
"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany
Lots more comments here!
Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook
"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.
Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!
New to Horizons Unlimited?
New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!
Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.
Read more about Grant & Susan's story
Membership - help keep us going!
Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.
You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.
|
|
|