Unven lift with new OME springs
I have just had a new set of OME springs fitted to an 80 series tlc. I have OME850 springs on the front and OME863B on the passenger side and OME863A on the driver side at the back. This is a UK spec vehicle.
Without any load the distance between the top to the wheel and the arch on the passeger side at the back is one inch higher than on the diver side. The vehicle looks tilted up at the back on the passenger side.
The worshop noticed this when I went to pick the vehicle up and said that there should be no difference between the two sides. They have offered to swap the springs around to see if this helps, no charge.
I'm not sure whether to ask for replacement with a new set of back springs.
[This message has been edited by Tonyabc (edited 01 November 2004).]
|