Generic answer for most any bike:

Once upon a time, long long ago, I used to tell people that "the stock shock was carefully designed to hold the rear fender off the tire when the bike is in the crate, on it's way to you". While clearly no longer completely true, I think it is still largely true for those of us running long trips two-up.

Overall, my personal feeling is that it is VERY important to put a good rear shock on any bike for a two-up round the world trip. It's not just a matter of "will the stock shock survive" but "will it work well in the meantime"?

The difference in handling - and therefore safety - between a hopelessly inadequate and overloaded stock shock and a shock built for the load is HUGE. My bike for instance handles very well fully loaded - and many G/S riders don't believe me - because they are riding on a stock shock, and have no idea of the difference. The rear shock is responsible for easily 80% of the handling of the bike, especially on a two-up and loaded tourer.

For another opinion, ask Chris Bright about how good stock shocks are - on his BMW R100GS he went through 4 stock shocks before he got wise and installed (I think) an Ohlins. Getting shocks shipped into Africa and South America is very expensive and a lot of hassle, and shocks have been know to fail spectacularly - breaking in half isn't unheard of.

Finally, no matter how hard you try, you will never get the load "balanced" - (short of putting 125 pounds of luggage in front of you to offset your passenger) you can only reduce the imbalance. "Balanced" is solo unloaded, (on some TOURING bikes balanced is two-up light load. The AT doesn't fit that category!)

Check out Works Performance (see the links page) for a shock for your bike - they custom make each one to suit the load and conditions. And their price is reasonable. You could get it installed in LA when you get there. Then you will really appreciate the difference! Tell them I sent you.

Specific to AT:

I know zip about AT's, and they may well come with a great shock for the job - but I'd be mighty surprised!

I've discussed our (as in 'world traveller') requirements at length with a real shock expert, and the conclusion is that it is practically impossible to build a shock that will work perfectly solo unloaded AND two-up fully loaded. The mechanics of the current shock / suspension system, and the characteristics of springs, are such that it just can't be done at an acceptable price and complexity. So if a bike is good solo from the factory, it has to be inadequately sprung fully-loaded two-up. A good compromise is all we can get.

Forgive the long-winded ramble, but I hope this clarifies things somewhat for all.

------------------
Grant Johnson

Seek, and ye shall find.
------------------------

One world, Two wheels.
www.HorizonsUnlimited.com

__________________
Grant Johnson
Seek, and ye shall find.
------------------------
Inspiring, Informing and Connecting travellers since 1997!
www.HorizonsUnlimited.com