 |
|
21 Dec 2006
|
|
Registered Users
HUBB regular
|
|
Join Date: Oct 2006
Location: Salisbury, UK
Posts: 21
|
|
|
Just refinished the overhaul of my '94 KLE500
Thought I'd drop a post up here after 3 months sorting out my 'bargain' KLE500.
Paid 600 GBP on Ebay for this with 25k miles on the clock but it had been dropped a few times and suffered years of minimal maintenance and a life near the sea. Though one of the recent owners had tried to give it some TLC and had fitted a new Hagon monoshock and chain and sprockets.
When I picked it up it looked like this.
Already had a an Arrow stainless system on it and came with a new and unused K&N.
After a new set of Avon Distanzia (recommended by Mutha4..); fluid change;carb rebuild, brakes overhauled and new rear pads; valves regapped and plugs replaced; reprayed the whole lot satin black (had odd panel colours due to drops); recovered seat black (don't do turquoise). Dropped the main fuel tank intake tube by 30mm so reserve cuts in later. Changed most of the fasteners to stainless and cleaned up the outside of the engine a tad.
Now looks like this. Even sold off the Scottoiler and Givi rack that came with the bike to pay for some of the bits 
Seat is rippled but I'm leaving that to settle before I retension.
New engine oil is pretty dirty already so I expect to change that again after 500 miles.
Cheers,
Paul
|
10 Jan 2007
|
|
Registered Users
HUBB regular
|
|
Join Date: Oct 2006
Location: Salisbury, UK
Posts: 21
|
|
UPDATE.......
After a few miles under it's belt as it were a couple of items will need attention. Front brake lever needs adjustment so I can easily get 3 gloved fingers on the lever to give it as much force as poss!
Brakes on the KLE have been mentioned on here time and again but after my '99 Triumph's twin disk set-up these are abysmal expecially in the wet. Now as part of the o/h the front calipers were rebuilt with new seals but I left the original pads on as the disks were no longers flat and had loads of meat on pads and disk. If I stick 'better' pads on then the braking will be worse than it is now for a while 
- So should I buy a new disk and pads?
- What are peoples preferences for manufacturer and type?
- Braided hose really worth the cost over the OEM if it is in good condition?
Now when the wheel was off I attempted to remove the disk from the ally hub and it was seized on solid. Anyone have any suggestions how to get those screws out?
All assistance graefully received 
Paul
|
11 Jan 2007
|
|
Registered Users
HUBB regular
|
|
Join Date: Oct 2006
Location: Cape Town RSA
Posts: 87
|
|
|
KLE rebuild
Hello Marlin.
Well done on the rebuild. I always love rebuilding things myself as well. The gratification is nice, and it gives me great pleasure that I have kept my hard earned cash away from some shark in a workshop.  I thought doctors were expensive!
Unfortunately I do not know how much the steel braided line costs, but I hear the guys find it a great improvement. If you are looking for better brakes, I would suggest looking at an oversized disk, and twin piston set. It would cost a bit more, but the brakes will be sorted. Then you would probably not need the steel line anyway. I do not know how tight the bolts are there, but about the only way to get those off, is an impact driver and a big hammer. I rebuild old land rovers for a hobby, and normally if you cannot get something loose, your hammer is simply too small. 
Good luck, and safe rolling.
Regards
__________________
Pleco
If its stupid, but it works, it aint stupid.
|
19 Jan 2007
|
|
Registered Users
HUBB regular
|
|
Join Date: Oct 2006
Location: Salisbury, UK
Posts: 21
|
|
Pleco,
Land Rovers...........tell me about it I have a '69 SWB sitting on the drive and I have several 'LR reapir tool No.1' hanging in the workshop
Any idea of a source for the oversize disk and is there an adaptor bracket to move the caliper out or use an alternative?
Cheers,
Paul
|
20 Jan 2007
|
 |
Registered Users
Veteran HUBBer
|
|
Join Date: Jun 2006
Location: London
Posts: 124
|
|
|
Oooh, I like the satin black look. Looks mean now, like something from a 1980's post-apocalyptic sci-fi movie.
I've given up on sorting the front brake. Instead, I've gotten used to using a lot more rear brake than you would on any other bike. When I get some money, I might try some six-pot calipers or something, but I think it's a losing battle. I did see some images of someone who had swapped the front forks and wheel for a 19" twin disk, but to be honest, it just looked like someone had swapped the front forks and wheel for a 19" twin disk. They reported better braking, so it may be worth it.
__________________
"On that? You're nuts!" - My cousin's boyfriend
Current Bikes - Kawasaki KLE500 '05 (May 06)
Previous Bikes - Hyosung GF125 (Oct 05 to May 06)
|
21 Jan 2007
|
|
Registered Users
HUBB regular
|
|
Join Date: Oct 2006
Location: Cape Town RSA
Posts: 87
|
|
|
KLE brakes
Quote:
|
Originally Posted by marlin.45
Pleco,
Land Rovers...........tell me about it I have a '69 SWB sitting on the drive and I have several 'LR reapir tool No.1' hanging in the workshop
Any idea of a source for the oversize disk and is there an adaptor bracket to move the caliper out or use an alternative?
Cheers,
Paul |
Hello Paul.
Yes, the land rover teaches you to work in circles. Start at the left front wheel, and work around clockwise. When you get back there, you can start again in the same circle. It is just never ending. Sorry guys wrong topic, but if you need any LR ideas, give me an email.
Unfortunately, I do not know of any brakes that will be a straight swap, but I am sure another Kawa set would fit right on there. You will have to do a bit of a swap out with the forks and mountings though.
Honestly though, I find the brakes on my KLE 400 adequate. It is not a superbike, so no SB brakes. I agree that you have to use some rear brakes as well, but that is a good driving habit. You let the bike squat a little with the rear brake, and then apply the front brake gradually and as hard as needed.
Regards
Lukas
__________________
Pleco
If its stupid, but it works, it aint stupid.
|
23 Jan 2007
|
|
Registered Users
HUBB regular
|
|
Join Date: Oct 2006
Location: Salisbury, UK
Posts: 21
|
|
Mutha/Pleco,
Starting to get the hang of far more rear end braking than I am used to on my last modern Triumph. Trick now seems to be three fingers on the front lever compared to two on the last bike and haul down on the rear as I get close to impact
Yes, I was aiming for the Mad Max effect. And satin washes better than matt
Unfortuately my LR is moving on after 7 years of 'fettlin'. Too many toys/hobbies.......................
Cheers,
Paul
|
13 Feb 2007
|
|
Registered Users
New on the HUBB
|
|
Join Date: Nov 2006
Location: Liverpool, UK
Posts: 13
|
|
|
Nice job Marlin...the bike is looking good. You can't beat black!
|
14 Feb 2007
|
 |
Moderated Users
Veteran HUBBer
|
|
Join Date: Jan 2006
Location: DogZone Country
Posts: 1,218
|
|
Lube it!
Good work - but get a Scottoiler back on!
|
1 Mar 2007
|
|
Registered Users
HUBB regular
|
|
Join Date: Oct 2006
Location: Salisbury, UK
Posts: 21
|
|
Noooo.......just taken that off
Easy enough to lube the chain by hand for the milage I do. Just requires a helper or a block of wood. 
Items I still need to look at:- - Front brake (as above) squeals when you apply it hard. But I am getting use to using a tad more rear.
- Big flat spot around 4k. Probably due to the Arrow system and std jets? Carbs balanced at 2k.
- I'd like to fit a front high motorcross style fender
- Probably going to pull that center section from the end can. Tad more fruity probably
Paul
|
1 Mar 2007
|
 |
Registered Users
Veteran HUBBer
|
|
Join Date: Jun 2006
Location: Planet Earth
Posts: 105
|
|
Hi Marlin,
I agree with you on motocross front fender it looks more enduro, and it fits nicely and easy.
About brakes I agree that is has a long braking distance than other bikes, but if you use both front and rear progressive it stops quite well, but you need to find a good combination between disk and pads.
__________________
See me,
Feel me,
Touch me,
BEER ME!
|
6 Mar 2007
|
|
Registered Users
HUBB regular
|
|
Join Date: Oct 2006
Location: Salisbury, UK
Posts: 21
|
|
Fitted some black handguards over the weekend and trying to locate a suitable moto fender that I can adapt. Mate has a broken Honda XL600 lying around. Have to see whether that is suitable?
Brakes. Currently have EBC green pads on the rear. Front - whatever someone else fitted before 
Paul
|
8 Mar 2007
|
 |
Contributing Member
Veteran HUBBer
|
|
Join Date: Mar 2007
Location: Liverpool UK
Posts: 225
|
|
|
Tank
Paul, Hi
Im interested in your mod to the petrol tank, You say your reseve kicks in later now.
I have a 2006 KLE and thinking of doing the same thing. I would think the tank will still be the same set up on your model as mine.
Wot was involved, can you take us through it?, what range do you get now before resrve?
Cheers
Roy
__________________
"Whats in that thing??", An R1 owner said.
|
8 Mar 2007
|
|
Registered Users
Veteran HUBBer
|
|
Join Date: Oct 2005
Location: the haque, the Netherlands
Posts: 127
|
|
|
yes please, im interested two, way to much reserve on such a smal tank.
|
11 Mar 2007
|
|
Registered Users
HUBB regular
|
|
Join Date: Oct 2006
Location: Salisbury, UK
Posts: 21
|
|
Reduced the height of the main fuel tube in the tank by 1". This should allow the main feed to run down around 1 litre later than before. OK, not much different but enough. The only downside is I lost the coarse filter in the main feed tube when I lopped it off. But I have an additional filter on the exit pipework to the carb so what the hey?
Not had a chance to measure the range difference. But obviously it will be further than before
Paul
|
|
Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Next HU Events
ALL Dates subject to change.
2025 Confirmed Events:
- Virginia: April 24-27 2025
- Queensland is back! May 2-4 2025
- Germany Summer: May 29-June 1 2025
- CanWest: July 10-13 2025
- Switzerland: Date TBC
- Ecuador: Date TBC
- Romania: Date TBC
- Austria: Sept. 11-14
- California: September 18-21
- France: September 19-21 2025
- Germany Autumn: Oct 30-Nov 2 2025
Add yourself to the Updates List for each event!
Questions about an event? Ask here
See all event details
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...
2020 Edition of Chris Scott's Adventure Motorcycling Handbook.
"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)
Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.
Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.
Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!
What others say about HU...
"This site is the BIBLE for international bike travelers." Greg, Australia
"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK
"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia
"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA
"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada
"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa
"This is the answer to all my questions." Haydn, Australia
"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany
Lots more comments here!
Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook
"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.
Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!
New to Horizons Unlimited?
New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!
Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.
Read more about Grant & Susan's story
Membership - help keep us going!
Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.
You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.
|
|
|
helps answer the question - Why Go? Inspirational stories by veteran travellers Greg Frazier (5 times RTW), Peter and Kay Forwood (193 countries), Tiffany Coates (Mongolia Mayhem) and Rene Cormier (University of Gravel Roads).
Get Ready! covers planning, paperwork, medical and many other topics! "Inspirational and Awesome!" See the trailer here!
What stuff do I need - riding gear, clothing, camping gear, first aid kit, tires, maps and GPS? What don't I need? How do I pack it all in? Lots of opinions from over 150 travellers!
break down language barriers, overcome culture shock, ship the bike and deal with breakdowns and emergencies."Just makes me want to pack up and go!" See the trailer here!
Grant demystifies the black art of Tire Changing and Repair to help you STAY on the road! "Very informative and practical." See the trailer here!
Ladies on the Loose! For the first time ever, a motorcycle travel DVD made for women, by women! These intrepid women share their tips to help you plan your own motorcycle adventure. They also answer the women-only questions, and entertain you with amazing tales from the road! Presented by Lois Pryce, veteran solo traveller through South America and Africa and author of 'Lois on the Loose', and 'Red Tape and White Knuckles.'
Cotton or synth sweat-wicking t-shirts with the cool Horizons Unlimited graphic on the front and a snappy slogan (changing every year) on the back.
Show your route on your panniers. Great conversation starter when you meet people on the road!
Motorcycle and travel books to inspire and inform you!
The definitive guide to planning your motorcycle adventure! This insanely ambitious 2-year project has produced an informative and entertaining 5-part, 18 hour video series. "The ultimate round the world rider's how-to!" MCN UK.
Lube it!
Linear Mode
