As promised, I'll try to put up a short summary of some of the things we talked about in the LC4 workshop at the HU meet in Germany last week. If you have any questions, feel free to PM me or Spooky (who did the workshop with me).

Contents

Online ressources, links, etc
Tools, tool kits
Spares, helpers, bodge-aids
Valve adjustment LC4 quick guide/recap
Modifications


Online ressources, links, etc

Advrider is a great place to get mechanical advice. Imho the HUBB is superior when it comes to travel, country-specific, paperwork etc information, but advrider has more people inclined to help with mechanical issues. Make sure to ask in the right forum (Thumpers for the LC4, Orange crush for the LC8).

Advrider also has a huge collection of guides and useful discussions, and they have it nicely indexed right for the 640 and for the 690. Picture guides for everything from cleaning your carb to changing your fork oil!

There's a couple more forums you might want to have a look at: KTM talk (english, KTM), Thumper talk (english, single cyl. trail bikes), and for the German speaking crowd KTM LC4.net (german). Don't be put off by the outlandish design of ktm-lc4.net, it does have a lot of knowledgable people.

Need part numbers, but don't have the parts manual with you? KTM World, microparts fiche has an online catalogue, just choose your bike model, year, etc and you can retrieve numbers for any part. Usually has diagrams too (unless you have a KTM Military). Having the part number is also a good way of comparing prices of online vendors, as otherwise the thing you might be looking for may be hard to find.


Tools, tool kits

Many people asked me who makes those tools that we showed around, so here we go:

The aluminium tyre-lever-hex wrench is made by "MotionPro" and called "T6-combo lever". In Europe you can get it e.g. from adventure-spec.com. For the LC4 you want the 27mm hex end, that'll do both front and rear (at least on pre-07 LC4's). If you need more torque, they are strong enough to put your foot on it. The blue 3/8 drive insert is also handy to have (especially if your front and rear nuts are different sizes). MotionPro also make a nice "TrailTool" and a lightweight chain-breaker.

Mini-ratchet wrenches are available from many companies, the ones I like and showed around are made by "Gedore". They are very strong, yet light and very good quality. They come in two varieties. I use the "7R" model, they are flat and ideal for reaching the valve cover bolts amongst other things on my KTM. Gedore also make another model called "7UR", with the wrench at an angle + reversible direction. Depending on your bike it might be better. Another alternative is the "Microspeeder" by Proxxon, in Germany available in OBI stores. Not as high quality as Gedore, but it comes with a hinge. I also had inserts for the 10mm ratchet wrench made by Gedore: a 1/4 drive and a bit holder. Very useful in my opinion, and very compact too. The ratchet wrenches come in all kinds of sizes, but I think 8mm and 10mm are the most useful. Bigger bolts are usually easier to reach, so you don't need the "gimmick tool", but for 8 and 10mm they are great.

The black/red tool roll I had with me is made by Touratech and has an inbuilt magnet to keep track of screws/bolts. It's nice, but many other things also do the job (I only bought it after my trip, so not neccessary by any means).

Feeler gauges: Buy a cheap set and take out the ones that you need. Usually that is the correct size for your setting (e.g. 0.18 on most LC4, or 0.20 on the KTM Mil, 0.15 on some KTM RFCs etc), plus one size larger and one size smaller. That way you can a) check how far off you are, and thus spot problems early, and b) maybe save yourself the hassle of adjusting the valves if they're not perfect, but close enough. Take out the blades and bend them in a Z-like shape so you have some kind of hope of getting them in, and then store them inside the spark plug tool so they don't get damaged.

For completeness sake, here is a pic of (most of my) current toolkit:



Contents (left to right), items marked with * are part of the OEM KTM tool kit:

1/4" drive and bit holder inserts for 10mm Gedore 7R ratchet wrench
small 8mm allen key (handle bars, engine top end)
Gedore 7R 10mm and 8mm ratchet wrenches
longer, stronger ball end allen keys 4mm, 5mm
* screw driver flat/Ph3
* KTM T-tool (6mm allen key) + sockets 6mm, 8mm, 10mm
* screw driver Ph2
Z/L shape flat blade screw driver (valve lash)
small Gedore 2B box wrench 10mm x 11mm (valve lash, brakes)
* open end wrenches 10mm x 13mm and 13mm x 17mm (I discarded the 8x10, Gedore 7R instead)
Flaig tyre pressure gauge (I am thinking of switching to a pencil gauge)
12V test lamp (can be improvised with an indicator)
KTM tyre levers with duct tape stored on them
KTM spoke wrench with more duct tape stored on it
* KTM spark plug wrench with feeler gauges (0.15, 0.20, 0.25) stored within
small vice grips
hemastat/roach clip (I am thinking about discarding this one ...)
* combination pliers (I am thinking about replacing it with a leatherman ...)
Bottom row:
sockets/bits for T-tool, ratchet wrench ...
Sockets 13mm, 19mm
Motion Pro T6 combo lever (27mm hex + tyre lever) + 3/8" drive insert, electrical tape stored on lever
Not in the picture: Topeak Mini Morph pump, valve stem tool, thread file, thread drills bits M6, M8


Some more info on my tool kit is on my blog (Moto Eurasia) under the "Bike" section.


There are many more discussions about what tools to take on the HUBB, but I'll reiterate a few important things here:
1. Take only the sizes that are found on your bike
2. Make sure the tool works on your bike (a 10mm socket is no good when you need an open end wrench and vice-versa), so you need to try this before you leave
3. Take only the minimum, and certainly don't take tools for jobs that you don't know how to perform. If you can't do the repair there's no point to take the tool for it, because the help you will need will most likely have its own tools.


Spares, helpers, bodge-aids

A very good thread and discussion of tools and aids is on advrider, have a look (but keep in mind that it needs to be bike specific, so take it as an inspiration, not a literal guide): ADV Rider toolkit thread

For comparison here's a picture of some of the bodge aids that I took with me to Nepal:

Neatly stored in this box:



Contents:



From left to right, and top to bottom, there is:

- zip ties, various sizes, some of the reusable kind
- little plastic bag with needles, thread, buttons, etc
- jubilee clips (hose clamps), two sizes, not only for hoses, but all sorts of repairs
- some spare bolts/screws M6, M8, longer ones, can be cut down if neccessary
- 3 film canisters (bit too big, but the best I could find at the time) with: talcum, grease, copper paste
- two shock and water proof spark plug cases (black) with spark plugs
- a spare inline fuel filter (in the meantime I use a washable one, plus they are available around the world so I don't carry this anymore)
- lock-tite (medium/blue) - KTM staple food!
- 2 sets brake pads, 1x front, 1x rear (in plastic wrap)
- high temperature silicone sealant paste (1/3 tube, no need to take a full one)
- a couple of gaskets (2-4 valve cover gaskets, some assorted copper washers etc)
- a universal throttle/clutch repair cable
- a couple of screw cable connectors
- a piece of silicone (high temp proof) insulated electrical cable
- wire thick and wire thin, ideally Ni plated so it doesnt rust immediately
- JB weld/metal epoxide or alike (blue thing in plastic bag)
- 2 miniature hack saw blades
- sand/grinding paper fine and medium (blue/black on top), ideally the kind that doesnt desintegrate when wet
- I did NOT take super glue (top right), because it's available everywhere and once open needs to be discarded as it usually spills and makes a mess. If you insist on taking super glue, take the smallest one time use version you can get, like the UHU minis (1g each) as shown in the pic
- little bag with 3 valve caps, 3 valve stems, 1 valve stem removal tool, 4 valve nuts

Not shown in the picture but also part of my kit:

- Magura blood (hydraulic clutch fluid, if you have an LC4 don't leave home without it!!! if you did, you can substitute mineral based baby oil ...)
- light bulbs (1x main beam, 1x tail light)
- carburetor jet needle and needle jet (Mikuni BST-40 specific)
- large syringe (reverse bleed clutch/brakes, remove engine oil if overfilled etc)
- piece of petrol hose (30 cm)
- piece of surgical tubing (50 cm)
- small funnel with piece of tubing (7cm) for frame oil change on the LC4
- 1x spare tube (regular, front)
- tube puncture kit
- duct tape, electrical tape (stored on levers and wrenches in tool kit)
- fuses 3x 10A, 2x 20A
- oil filters (other people may prefer to use reusable metal filters made by Scott)
- nylon string (stored with camping gear)


Valve adjustment LC4 quick guide/recap

Top dead centre (compression) on the KTM Military the easy way (check that this applies to your bike, doesnt work on all LC4s!): Center stand, fifth gear, turn rear wheel forward very slowly until your hear the auto-decompressor (loud-ish "clack" sound) kick in. After that keep turning the rear wheel forward very very slowly and look at the stator on the right hand side (little glass window). As soon as the dead center marking reaches the window and is vertical in the window, you have reached top dead center (compression). Watch out it's only a short way from when the auto-deco clicks, if you go too far, the next time the mark comes up, it's the other top dead center. Double check with a screw driver or similar that the piston is at the top AND you can see the crank mark (where the fixing screw goes) AND check by hand that the valves (both inlet and outlet) have a tiny play to them. If they sit rock solid, either you messed up finding top dead center, or the manual decompression lever is not all the way back down.

Valve inspection recap on the KTM Mil: Take off the tank, frame breather hose and fan on the left side, unscrew the capacitor on the right, unhook the decompression cable, make sure the decompression lever is back all the way down, unscrew the spark plug, bring the engine to top dead center (very simple on the KTM, read above), ideally lock engine at top dead center with the crank shaft screw (special KTM part or make yourself), take off the valve covers (flat ratchet combo spanners like the Gedore 7R work very well here), slide in your feeler gauges. There also is a valve lash inspection guide on ADVrider, see the LC4 index page above to find it (or click here if you're lazy).


Modifications

I'll let Spooky fill in the gaps here, he had a much more comprehensive list than I do, but for now a few things I did on my bike:

- Neoprene fork gaiters, really a must on any USD fork. In addition (or if you dont have gaiters, you can also pack grease behind the dust cap). Remember we discussed fixing fork leaks by sliding something thin between seal and fork to clean it out. Sjaak also mentioned a special tool for this job, but I forgot what it is called. Maybe one of you knows?
- Reinforced rallye clutch springs (3 or 6, depending on how strong your left hand is): less clutch wear, more tolerance (less clutch slipping) with bad oil
- Ultra heavy duty innter tubes (e.g. Michellin), possibly in combination with "Slime" inside the tube.
- Hand adjustable fuel mixture screw if you plan on going to high altitudes. Fix it to the frame with a piece of wire or take the original, as some people have reported losing it on the road.
- in-line fuel filter and fuel line quick connectors (useful for maintenance, petrol stove filling etc)
- Sheep skin or self-made/after market seat ...

That's it for now, if I forgot something then please let us know!