10Likes
|
|
23 Feb 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Apr 2001
Location: Canada and the Alps
Posts: 134
|
|
Air Canada Cargo - Now Shipping Motorcycles...Cheaply
Well they always have but at out of this world prices.
For the riders on here that have been lucky enough to have toured Europe, Air Canada is promoting motorcycle shipping by air. By "promoting", I mean at 1/3 the cost that it ran me in 2010.
While at the Toronto Motorcycle Show last weekend, Air Canada had a booth staffed by Air Canada Cargo personnel. They will have their web site up shortly, but this is what I walked away with:
Toronto or Montreal (and other cities as well) to London, Frankfurt... (there was a list of cities) $700 with ticket purchase or $1000 without, for one way. I paid about $2250 one way in 2010. Check with them for other destinations.
Considering motorcycle rental runs about $1000 a week, a three or more week tour makes this worth it.
|
23 Feb 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Apr 2001
Location: Canada and the Alps
Posts: 134
|
|
From their site...
February 18, 2015
Fly your bike with Air Canada Cargo
Did you know that Air Canada can also ship your motorcycle?
This convenient service is available from Montréal, Toronto and Vancouver to multiple destinations around the world.
When your travel is booked with Air Canada, you'll benefit from a special rate for your motorcycle.
FIND OUT MORE
For more information on shipping your motorcycle with Air Canada Cargo, please contact us:
MONTRÉAL: 1-800-361-2159 yulff.lcacc@aircanada.ca
TORONTO: 1-800-387-4865 yyzff.acconnect@aircanada.ca
|
24 Feb 2015
|
|
Gold Member
Veteran HUBBer
|
|
Join Date: Nov 2003
Location: Central New York
Posts: 344
|
|
Very interesting, thanks for sharing. They even put out a news release on motorcycle shipping! What's new - Air Canada Cargo
I just sent them an email. I want to get a bike from Toronto or Montreal to South Africa. It doesn't appear Air Canada flies to South Africa directly according to a map on the website, but we'll see...
|
24 Feb 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Apr 2001
Location: Canada and the Alps
Posts: 134
|
|
Quote:
Originally Posted by Ride Far
|
Note the 2nd post. They put that out February 18th, two days before the Toronto Motorcycle Show where I came across their info booth.
Quote:
Originally Posted by Ride Far
I just sent them an email. I want to get a bike from Toronto or Montreal to South Africa. It doesn't appear Air Canada flies to South Africa directly according to a map on the website, but we'll see...
|
When you find out, please post their reply.
|
24 Feb 2015
|
|
Gold Member
Veteran HUBBer
|
|
Join Date: Nov 2003
Location: Central New York
Posts: 344
|
|
Had a fast reply to my email. Air Canada doesn't fly to South Africa, so they're not interested. Would require transfer to a different carrier in Europe, as expected.
South Africa Airways does a Toronto-Munich-Johannesburg route, and I have a good quote of $1500 USD through a broker for that option, including bike crating.
I also asked the Air Canada rep if they had a list of destinations -- not exactly. Basically, "most of the major stations we fly into" ... handled on a case by case basis depending on available cargo space in an aircraft.
And they'll take bike shipments into Canada, of course -- good news for anyone wanting to get a bike to North America.
|
24 Feb 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Apr 2001
Location: Canada and the Alps
Posts: 134
|
|
Quote:
Originally Posted by Ride Far
I also asked the Air Canada rep if they had a list of destinations -- not exactly. Basically, "most of the major stations we fly into" ... handled on a case by case basis depending on available cargo space in an aircraft.
|
They did have a list at the show. Unfortunately it was not a hand-out.
Available cargo space was always the case, even when I shipped with Air Canada through Kuehne & Nagel the first two times. It is why I always dropped the motorcycle off some 4 or 5 days prior to my flight and I always wanted it to go out a day or two before so that I am not waiting for it to get to the AC cargo facility even though they are right at the airport.
|
24 Feb 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Mar 2007
Location: UK
Posts: 4,343
|
|
__________________
Dave
|
24 Feb 2015
|
|
HU Meeting Organiser
HUBB regular
|
|
Join Date: Sep 2004
Location: Orillia, Ontario, Canada
Posts: 29
|
|
Just so all are aware. This program will be a trail for the whole of 2015, to virtually all their wide-body jet locations world wide, any direction. I even got them to guarantee my return price over a year later in 2016 from any of their destinations in Europe (London, Paris, Venice, Rome). They also offer insurance for shipping at $3/$1000 value and this includes all accessories and contents in the panniers as long as they are left open and manifested for customers both ways.
Yes you can also fly out from any of their destinations as long as you arrive in Canada for the same discounted amounts. Prices do vary depending of location obviously.
If you want to speak with their rep in person, they will have a booth at the HU meeting in Ontario in June where you can book as well within 30 day window.
__________________
The less one knows about bikes, the more one loves Harleys!
|
24 Feb 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Apr 2001
Location: Canada and the Alps
Posts: 134
|
|
Quote:
Originally Posted by Walkabout
|
Yes, I noticed that later.
I'm not on here very often since all I tour is Europe and after 20 straight years of doing so, chances are any new tips of importance are already known to me.
|
24 Feb 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Apr 2001
Location: Canada and the Alps
Posts: 134
|
|
Another reply from Air Canada since I advised them it would be a good idea to mention dimensional maximums. I have done this many times, so what is obvious to me, may not be to others.
Quote:
We have several types of containers with maximum height being 63 inches. Not sure if any of these windshields would exceed that, but during the booking process, all customers will be asked to provide basic dimensions.
|
That means taking the windshield off on certain motorcycles.
And here are other responses from Air Canada that motorcyclists might have...
Quote:
Thank you so much for stopping by our booth and showing interest in shipping your motorcycle with Air Canada Cargo.
I would also like to thank you for all of your suggestions. Since you have posted news reports on a forum, I would like to clarify a few points below for you in the event you get questions from people who read your post.
*** A question on the forums asked "what about shipping damage?" It would be in the interest of both parties to inspect the motorcycle and sign a form so that there is agreement as to the condition of the motorcycle as received by Air Canada.***
RESPONSE: We are in the midst of finalizing the stipulations and regulations to ship these motorcycles with us by air. We are also advising customers that they can buy additional insurance coverage from us at a rate of $3.00/$1000 of the insured amount to cover you from tender time to retrieval time. All our shipments get inspected before they are loaded to ensure they are in good order. If we feel there is damage or other points that need to be noted we do have our customers sign off on a waiver showing in detail such items.
*** I would suggest traveling one or two days after the motorcycle ships to avoid having to wait for it till it is delivered to Air Canada cargo. I always did that. ***
RESPONSE: This suggestion may not work well for customers shipping to the UK or South America as shipments that are of the dangerous goods nature such as motorcycles are subject to storage charges 24 hours after arrival. It would actually be best for customers to plan to ship their motorcycles on the same day, or the day after they are scheduled to depart to avoid these additional charges.
*** Forums members also wanted to know who clears the motorcycle through customs. Will Air Canada perform this task or will they have to walk to the nearest brokerage as I have from ACC/LHR - Shoreham Road East to a broker nearby to clear the motorcycle. ***
RESPONSE: As we are an airline, we are only responsible for the transportation of the motorcycle. We do not have our own brokers, nor can we clear customs for our shippers. Customers will be responsible to tender their paperwork to local customs on their own at all international ports.
|
On the shipping in advance topic, as I mentioned I always shipped a day or two before my flight. I've never been charged a "storage charge", not for two days. That might have changed since 2010 or if your motorcycle sits there for a week.
Due to their response above, I then asked "But if it arrives with the passenger, how long does it take for the motorcycle to reach the cargo facility from the aircraft?"
Air Canada's response:
Quote:
With cargo, normally the offloading of an entire aircraft can take approx.. 6 hours, sometimes less depending on where on the aircraft the container holding the motorcycle was loaded.
|
Six hours is a bit long to have to wait. I am usually on the road 6 hours after landing and that covers getting my luggage, clearing customs, taxi transport to Air Canada Cargo, clearing the motorcycle through customs, getting gas, installing parts, etc.
As for clearing customs, I always had to do the legwork. The office the last two times was a 15 minute walk from Air Canada Cargo on Shoreham Road East at London-Heathrow. Once there, maybe 30 minutes and I was done.
|
24 Mar 2015
|
Gold Member
Veteran HUBBer
|
|
Join Date: Jan 2002
Location: Toronto, Canada
Posts: 2,134
|
|
There's more discussion of this same subject at this post:
http://www.horizonsunlimited.com/hub...ler-deal-80707
Below is a picture of my motorcycle (a Honda ST1100, also known as a 'PanEuropean') inside a Uniform Load Device (ULD, also known as an 'air freight can'). This particular size of ULD is used on wide-body flights.
When I shipped this motorcycle to Europe from Canada, the guys in the freight shed told me to not bother putting it on a pallet, instead, I just drove it into the can and tied it down in the can. But, some freight depots prefer to have the moto put on a pallet that they can then forklift into the can. So, find out in advance what the local preference is. Be aware that if you build your own wooden pallet, you have to use pressure-treated (chemically treated) lumber, otherwise the agricultural inspectors at the other end will have fits worrying about whether some unwanted wood-boring insect might be sneaking into the country undocumented inside your pallet.
There are more photos at the other post, the one I referred to above.
Michael
Motorcycle inside an air freight container
|
24 Mar 2015
|
Gold Member
Veteran HUBBer
|
|
Join Date: Jan 2002
Location: Toronto, Canada
Posts: 2,134
|
|
Quote:
Originally Posted by Global Rider
Six hours is a bit long to have to wait. (in reference to how long it might take to offload the airfreight from the aircraft)
|
I've shipped my moto back and forth across the Atlantic many times, and never had to wait anything remotely close to 6 hours to get it.
In practice, the freight comes off the aircraft itself very quickly (just as quickly as the passenger baggage comes off). Once off the aircraft, it has to be transported to the air freight warehouse, which is usually some distance away from the passenger terminal.
But, if you are on the same plane (as a passenger), you'll have to go through immigration, get your luggage, go through customs, then take a taxi over to the air freight warehouse, and by the time you do that, the motorcycle will most likely be at the warehouse. I've never "beaten the motorcycle to the freight shed" in my life... it's always been there before I get there.
What you do need to know is that the taxi ride from the passenger terminal to the freight shed will not be cheap (the freight sheds are almost always on the other side of the runway, that means a $50 taxi ride), and it will take you an hour or two to do the paperwork and get the motorcycle cleared out of the freight shed by Customs (a much faster and easier process in Europe than it is in Canada). Then, finally, you will have to pay the warehouse fees, which will include one day of storage even if your bike has only been in the building for 30 minutes (figure on about $100 in warehouse fees), and finally, you will need to get the bike out of the can - or off the pallet, as the case may be - and out onto the road.
Don't take it for granted that you will simply be able to drive out of the air freight warehouse. Often, the warehouses have truck docks on the public (the exit) side, and no ramp to run the motorcycle down. That means that you then have to hang around until you can find a sympathetic truck driver who will lower the bike down to the pavement using the liftgate on his/her truck.
Best time I have ever experienced was going into Paris - the plane landed at 0600 in the morning, I was riding down the road on the bike at 0810. But that was quite exceptional. Typically, it takes about 3 hours from touchdown to getting on the road (that's for Europe), and it can easily take a whole friggin' day in Canada.
Michael
|
24 Mar 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Apr 2001
Location: Canada and the Alps
Posts: 134
|
|
Quote:
Originally Posted by PanEuropean
Be aware that if you build your own wooden pallet, you have to use pressure-treated (chemically treated) lumber, otherwise the agricultural inspectors at the other end will have fits worrying about whether some unwanted wood-boring insect might be sneaking into the country undocumented inside your pallet.
|
That didn't seem to be an issue since it was never mentioned at either end of the transport.
In every case, I either modified pallets (first pic) or made my own (second pic) simply because I wanted to make sure nothing happened to my motorcycle and that it was tied down rock solid. I did all the prep work. The base of those containers look flimsy as in they look as if they could bend in on themselves.
First trip over in 1995...
Last time I shipped...
|
24 Mar 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Apr 2001
Location: Canada and the Alps
Posts: 134
|
|
Quote:
Originally Posted by PanEuropean
I've shipped my moto back and forth across the Atlantic many times, and never had to wait anything remotely close to 6 hours to get it.
|
Same here in my 20 years of riding there, but as Air Canada indicated to me, it can take up to 6 hours to get the motorcycle to the cargo facility. Something I am not willing to risk with jet lag...I want to get going.
Quote:
Originally Posted by PanEuropean
Then, finally, you will have to pay the warehouse fees, which will include one day of storage even if your bike has only been in the building for 30 minutes (figure on about $100 in warehouse fees), and finally, you will need to get the bike out of the can - or off the pallet, as the case may be - and out onto the road.
|
Who have you been flying with? I've never paid any warehouse fees and my motorcycle gets there a day or two before I arrive.
You won't be able to do anything to the motorcycle till it has cleared customs.
|
24 Mar 2015
|
Gold Member
Veteran HUBBer
|
|
Join Date: Jan 2002
Location: Toronto, Canada
Posts: 2,134
|
|
Quote:
Originally Posted by Global Rider
Who have you been flying with? I've never paid any warehouse fees and my motorcycle gets there a day or two before I arrive.
|
Hi Alex:
The whole 'warehouse fee' issue seems to be dependent on whether the air carrier that you ship the motorcycle with owns and operates their own freight shed, or whether they use an agent to handle their freight at 'out' destinations (meaning, destinations outside of the home country of the air carrier).
Most of the time, I've shipped with Air Transat, a Canadian charter carrier. They don't operate their own freight facilities anywhere, instead, they contract out their freight handling to independent facilities at each airport. I have always had to pay warehouse fees at the receiving end of the shipment, but never at the drop-off location.
I don't know what Air Canada's policy on warehouse fees is - my guess is that it is going to vary by location, and also vary depending on whether it is Air Canada themselves or a third party that handles the freight at the destination.
What I do know, and this is from a lot of experience, is that one always has to be prepared to pay a very wide variety of fees (customs fees, inspection fees, port fees, etc.) that can be imposed by any number of participants (the air carrier, the warehouse operator, the airport operator, customs & agricultural inspectors, etc.) at the receiving end of the shipment. Sometimes one might get lucky and pay very little, sometimes you get the shaft and have to pay $100 to $100. It's a bit like buying a passenger air ticket, in the sense that there are lots of little surcharges that might get added on.
Personally, I think it's great that Air Canada is trying to make it more attractive to customers to ship motorcycles by air. I think Air Canada is a trustworthy and honest company - I've flown over 1 million miles with them, and been given an award for that.
What I have been trying to stress to novice motorcycle shippers in the posts I have made recently is that the the whole process of shipping a motorcycle internationally by air is not as simple as just checking in baggage at the passenger terminal. There are forms to fill out, and processes that have to be gone through (mostly at the destination end). The paperwork is not especially complicated, but for someone who has not done it before, it can be intimidating.
In particular, the legal requirement (IATA regulation) that states that the cargo carrier and their representative who receives the shipment cannot complete the DG paperwork (the person shipping the moto has to do that) can present a last-minute surprise to novice shippers, and problems can arise if the folks at the freight shed are not familiar with the classification (UN 3166, vehicle, flammable liquid powered) and packing instructions for the moto. That stuff is easy for me because I am a retired aircraft pilot who used to teach DG documentation courses. It's not going to be quite so easy for someone who has not ever shipped air cargo internationally.
Hence my recommendation that first-time shippers visit the freight receiving facility well ahead of time to become familiar with the process (and possible pitfalls, such as how to get the moto onto the dock and into the freight shed), and that the ease of getting the moto cleared through customs at the destination end will vary very much depending on the destination country.
Michael
|
Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Next HU Events
ALL Dates subject to change.
2025 Confirmed Events:
- Virginia: April 24-27 2025
- Queensland is back! May 2-4 2025
- Germany Summer: May 29-June 1 2025
- CanWest: July 10-13 2025
- Switzerland: Date TBC
- Ecuador: Date TBC
- Romania: Date TBC
- Austria: Sept. 11-15
- California: September 18-21
- France: September 19-21 2025
- Germany Autumn: Oct 30-Nov 2 2025
Add yourself to the Updates List for each event!
Questions about an event? Ask here
See all event details
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...
2020 Edition of Chris Scott's Adventure Motorcycling Handbook.
"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)
Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.
Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.
Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!
What others say about HU...
"This site is the BIBLE for international bike travelers." Greg, Australia
"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK
"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia
"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA
"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada
"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa
"This is the answer to all my questions." Haydn, Australia
"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany
Lots more comments here!
Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook
"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.
Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!
New to Horizons Unlimited?
New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!
Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.
Read more about Grant & Susan's story
Membership - help keep us going!
Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.
You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.
|
|
|