Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Suzuki Tech
Suzuki Tech Suzuki Tech Forum - For Questions specific and of interest to Suzuki riders only.
Photo by Andy Miller, UK, Taking a rest, Jokulsarlon, Iceland

I haven't been everywhere...
but it's on my list!


Photo by Andy Miller, UK,
Taking a rest,
Jokulsarlon, Iceland



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 18 Feb 2008
Registered Users
New on the HUBB
 
Join Date: Jun 2007
Location: Sydney
Posts: 15
DR650 major clutch slip

Hi All,

I am currently in Northen lao, and I have a problem... After taking a back back road not marked on my map I encountered a big muddy hill. As it was verry deap and slippery mud and I am carring a lot of luggage I had to ride the clutch to keep control. Almost at the top of the hill my cluch even at full relese failed to engage the gears enough to make the top. I had to dismount and drive/push the rest of the way. After this I had verry little pull at any revers in any gear and had to ride slowley on the flat sections and push with a little throtel up the any hills.

Once off the dirt and on the highway the problem continued except for a few KM after a long down hill run I got some drive back and managed to get it to pull to arround 80kms.

I am now in a position to pull it apart but not sure what to look for. If I need parts they will take about 3 weeks to arrive so not sure if I should order a compleate kit just in case.
Thanks for you help
Cheers
Ben
Reply With Quote
  #2  
Old 18 Feb 2008
Registered Users
Veteran HUBBer
 
Join Date: Nov 2004
Location: USA
Posts: 992
A clutch kit for the DR runs about $150 in the US.
They include springs, steel plates and the friction plates.
EBC and DP are two brands.
I don't think Barret makes a 'complete' kit for the late year models, but does has the parts to piece one together.
Reply With Quote
  #3  
Old 19 Feb 2008
Registered Users
New on the HUBB
 
Join Date: Jun 2007
Location: Sydney
Posts: 15
Thanks Lone Rider,

I can find a Barnett $139 and EBC $99 kit on ebay both for the SE wich mine is. They both include Steal and ceramic plates springs which do you think is better?
Thanks
Reply With Quote
  #4  
Old 19 Feb 2008
Registered Users
New on the HUBB
 
Join Date: Feb 2007
Location: Dublin, Ireland
Posts: 19
There's nothing jamming the actuating arm? Cable free and not seized?

Before you tear into the motor...
Reply With Quote
  #5  
Old 19 Feb 2008
Registered Users
Veteran HUBBer
 
Join Date: Nov 2004
Location: USA
Posts: 992
Quote:
Originally Posted by Silktrailie View Post
Thanks Lone Rider,

I can find a Barnett $139 and EBC $99 kit on ebay both for the SE wich mine is. They both include Steal and ceramic plates springs which do you think is better?
Thanks

I am not familiar with the ceramic plates and haven't heard of people using them, sorry.
I've used the EBC kit without problems.
Reply With Quote
  #6  
Old 19 Feb 2008
Registered Users
New on the HUBB
 
Join Date: Jun 2007
Location: Sydney
Posts: 15
Thanks Guys,

I have opened the cover and inspected the clutch, to find the first friction plate is almost warn away. There are none of the ridges left and deep scoring all over the disc. The rest look ok but I think I will replace the lot and save the best ones as spares.
I hope the lao postal system works well!!
Reply With Quote
  #7  
Old 21 Feb 2008
Registered Users
New on the HUBB
 
Join Date: Jun 2007
Location: Sydney
Posts: 15
Thanks Patrick,

I tried Suzuki in Thailand and Laos and they have to order from Japan. I am currently Packpacking through China so I might be able to get a genuine one from Hong Kong otherwise my parents can get one in Aus and post it through.

Thanks for the advice on stopping to cool off, I will remember that one for next time. I have already droped the front to a 14tooth but maybe I need to get a bigger rear for the offroad stuff.

Thanks for the tip on soaking the plates will do that first.
Cheers
Ben
Reply With Quote
  #8  
Old 21 Feb 2008
beddhist's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Sep 2003
Location: Whangarei, NZ
Posts: 2,214
Big bikes have been banned in Laos, so you won't find any parts there. Thailand shouldn't be a problem.

I've bought EBC plates for a Honda CX500 and they were terrible. Major changes in clutch adjustment (free play) with changes in engine temperature. I've never heard of this problem before, so advise caution. Perhaps better stick with genuine parts.

If you are stuck and need to get going you can either pull the springs to lengthen them or add a washer under each spring.

I'm running a bigger rear sprocket for road use and have a smaller front sprocket for the rough stuff. Standard gearing is too tall on this bike for all but road use.

Are you one of the Aussies I met at the HU meet in Chiang Mai?

Cheers,
Peter.
__________________
Cheers,
Peter.

Europe to NZ 2006-10
Reply With Quote
  #9  
Old 23 Feb 2008
Registered Users
New on the HUBB
 
Join Date: Jun 2007
Location: Sydney
Posts: 15
Hi peter,

yep its ben from the HU meeting in Chang Mai! Had some adventures on terrible roads in Pongsali povince north laos.

I have spoken to a shop in Chang mai and he said he can order but from china then he would have to post to Luang Namta so it would take a month. i can get my folks to pick up genuine friction plates from my dealer in Aus and post express which i think might be the best option.

They are a little dearer but maybe the best option.

AS for laos and big bikes, there is no problems getting in and riding arround as they hardly have customs officals at boarder crossings. We had no problems and were never asked for papaerwork.

Hope your travels are going well
Cheers
Ben
Reply With Quote
  #10  
Old 23 Feb 2008
beddhist's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Sep 2003
Location: Whangarei, NZ
Posts: 2,214
Hi Ben,

Glad you are OK and it was nice to meet you, but I lost track of you. I actually went to Jungle Lodge to look you up, but you had already left.

I strongly suggest you replace the springs as well if you have given your clutch such a hard time. If in doubt, you can measure them with calipers, they should be at least 33 mm long.

Good luck,
Peter.
__________________
Cheers,
Peter.

Europe to NZ 2006-10
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
DR650 trouble free jetting? Jeffr726 Suzuki Tech 8 9 Jan 2009 01:03
Once a girl makes up her mind... XT GIRL Suzuki Tech 31 12 Feb 2008 04:13
DR650 fuel tanks MikeS Suzuki Tech 12 4 Feb 2008 01:27
DR650 Bulletin Board PeteSC Suzuki Tech 2 19 Jun 2004 02:10
Clutch, slip slip slipping away Owain G Yamaha Tech 1 16 Apr 2004 01:17

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

ALL Dates subject to change.

2025 Confirmed Events:

  • Virginia: April 24-27 2025
  • Queensland is back! May 2-4 2025
  • Germany Summer: May 29-June 1 2025
  • CanWest: July 10-13 2025
  • Switzerland: Date TBC
  • Ecuador: Date TBC
  • Romania: Date TBC
  • Austria: Sept. 11-14
  • California: September 18-21
  • France: September 19-21 2025
  • Germany Autumn: Oct 30-Nov 2 2025

Add yourself to the Updates List for each event!

Questions about an event? Ask here

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

Adventurous Bikers – We've got all your Hygiene & Protection needs SORTED! Powdered Hair & Body Wash, Moisturising Cream Insect Repellent, and Moisturising Cream Sunscreen SPF50. ESSENTIAL | CONVENIENT | FUNCTIONAL.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 07:45.