Flush out the scottoiler and delivery pipe with very warm (not boiling) water.
Use an empty scottoil refill bottle or similar to force the water through. Using the same priciple/method as when you first fill and prime a new scottoiler (instructions on their website)
Leave it on prime with the engine running and squeeze that bottle hard.
You will eventually flush it all out.
ORRRRR... Just use it all up. WD40 won't do any serious damage to your chain. There are loads on internet experts who say it eats your 0-rings, and maybe they're right , but I don't think any chain will last long enough for that to happen unless you're only using the bike once a year.
If it were me, I'd just leave it be and use it up and enjoy a life lesson learned.
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
|