Snakebites.... 
snakes can figure out the difference between a dead tryre and a warm human!
Ultraseal tips
You can use it in inner tubes- the centrifugal force of the wheel spinning ensures a smooth coating- go for a short ride as soon as you have put the right amount in-
It remains 'liquid' in the tyre so you might get a strange feeling a short distance until the wheel has spun round a bit and evenly coat the tube again (or tyre)
It is 'washable' as in it is a myth that tyre repairers wont touch your tyres when ultrasealed- If they say that then just find water and wash out the tyre which can then be plugged (for tubeless) or vulcanised.
For tubed tyres, trick is to hold the hole at the top and 'squeeze' the ultreasel down so that it doesn't seep out. Wash top of tube, dry, sand down a bit then do your usual patch work AND ALLOW GLUE TO DRY PROPERLY.
common mistake is to try to refit same tube and ride off when the glue has not had time to bond.
Use your new tube, make a proper repair and allow to dry while you sleep.
Ted's right as to carry spare tubes of lotsa glue and few spares anyways.
|