1989 XT600 Carbuerator Packings
Hi All,
So after failing yet another emissions test, I yanked both carbs off. Sure enough, I found the RH inlet rubber delaminated. So I decided to do a carb overhaul while everything was apart.
All the carb packings are hard as a rock and need replacing. Is there a master list of commercial packings available?
PS: I glued the rubber boot back to the base using gorilla glue. I put a small blob on the rubber, got it hot by leaving in the sun, can't peel the blob off, even though it was too hot to hold onto. I'll post the results.
|