3AJ Clutch Push Lever setting?
I need to do the clutch adjustment after taking my clutch off. To set the 'push rod No.1' at the correct point, you have to move the 'Clutch Push Lever' (on the left side of the engine) to a certain position. This position is to align 2 markings, 1 on the Lever itself and the other on the casing. How do you see these markings?
The level and markings are hidden under the starter motor. Do you have to take the Crankcase Cover and Starter Motor off to do this? I would hope there was a quicker way?
I have tried mirrors, but cannot see how it can be done without taking the Crankcase Cover off as the main problem on a 3AJ1 is that the cover extends up to cover the Starter Motor drive.
Appreciate your help with some advice on how to do this.
Thanks, Geoff
|