Quote:
Originally Posted by david.malec
Hello everybody and sorry for this trivial question.
I'm quite new to "big bikes" and I recently bought Yamaha 660 XTZ Tenere. I need to change a spark plug, but when I looked at it, it seems to be quite difficult. There is very little space above the plug and I don't even know how to unmount the cable from it.
I'm sure you must be laughing, but please can you give me advice (as detailed as possible please) how to do that. I was searching forum (and internet) without success ...
Thank you and have a nice day
David
|
Don't worry.. Everyone has to start somewhere.
Pull the plug off from as near to the spark plug as possible using the cap, not the cable !!
You will need the correct size spark plug socket or correct size "deep" socket to go over the spark plug. Using a socket driver or spanner (depending on the plug tool). loosen it anti-clockwise until its free... The threads are quite long so it might take a while.
To install the new one, made sure the little copper washer is on the plug, put a little fresh oil on the threads and screw it in my hand if possible making very sure you dont cross-thread it... If you don't have the use of a torque wrench do it up quite tight but not so your putting your back into it..
It very easy.. You will be just fine my friend !!
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
|