Thank you for instant response, I will try that as soon as possible!
So if I understand it right, I must remove cap by just pulling - I tried that but it did not worked, maybe I must pull harder, I thought there is some kind of screw ...
Thank you again, if I'm still in trouble, I'll write back
David
Quote:
Originally Posted by *Touring Ted*
Don't worry.. Everyone has to start somewhere.
Pull the plug off from as near to the spark plug as possible using the cap, not the cable !!
You will need the correct size spark plug socket or correct size "deep" socket to go over the spark plug. Using a socket driver or spanner (depending on the plug tool). loosen it anti-clockwise until its free... The threads are quite long so it might take a while.
To install the new one, made sure the little copper washer is on the plug, put a little fresh oil on the threads and screw it in my hand if possible making very sure you dont cross-thread it... If you don't have the use of a torque wrench do it up quite tight but not so your putting your back into it..
It very easy.. You will be just fine my friend !! 
|
|