CDI and Relay ...
Hello,
My electronics knowledge is basics so here are the problems
I rebuilt my Xt 600 e 1998...Found a loom which seems to come from a 1999. The relay connector from the loom is a 3 pin with a positive wire ?but the 1998 relay has 2 pin only to the switch
And I have no connector between the relay 4 pin I need to get and the loom so need to work on that and plug the wires on the right pin onto the relay.
Then I guess the10 amp fuse is now located on the relay itself as i cant see it elsewhwere on the loom.
Finally i wonder if the CDI from a 1998 bike will work with later loom 1999 onward even if it plug perfectly...
Photo may be easier....but dont have the bike now...Hope this was clear.
Thanks
|