Electrical Gremlins
Hey guys n gals. I had a previous post about my electrical gremlins, and just wanted to post again.
I have checked every ground I could find, pulled apart all the plugs, and I still cannot figure my problem out. Wiring harness looks fine as well.
I have a 1984 xt 600 and I just cant seem to get the electrical components to work right. I swapped in an engine from a 87 or 88 xt600, and all the electrical plugged right in.
1. First off is the neutral light. When i dont have a battery in, it kinda works, but stays on sometimes when its in gear. When I have a battery in the nuteral light stays on all the time.
2. When I have a battery in the headlights work awesome, but when I dont have a battery in, its pretty dim. (not sure if this is a problem or not)
3. The tail light doesnt light up with or without the battery installed and the bike running(I installed a brand new led bulb) but the brake light works with both the front and rear brakes.
4. Last is my signal lights. I bought some LED and installed them, and all four come on when I turn the switch to either the left or the right, when I dont have a battery in, and when I have a battery in.
I used the same flasher as stock, so that may be the problem there?
Anyways i could really use some tips and advice, as I am trying to get this bike ready for a safety, so I can legally ride it on the road!
|