I think it will fit in the frame ok
but you should get a clutch cable for the 2002 engine
Maybe bring a good flywhel puller so you can put the 3AJ stator and flywheel on the 2002 engine and still use the 3aj loom and cdi
Not sure where the oil tank on the 2002 model is maybe, check some parts diagam to see if oil lines are in the same place.
I have seen newer xt engine as in 3tb in 3aj and also 3tb in ttr frames but dont know if they just fit stright in.
Try and find out if the front sprocket will be inline with the rear or if you need some modifcation.
good luck
|