new issue. left control cluster is shorting out
I learned today where my overload protector for the bike is, and how to use it.
turns out, I did SOMETHING when I serviced my left handlebar cluster earlier, mostly tightening up the loose screw on the turn signal selector, and cleaning it out a little. now it trips the relay on my bike in a minute of the key being on.
whats weird is, ALL I did to the elctrical stuff was resolder a power wire for the turn signal, and clean connections. if anything, it should have beefed up the contacts.
I know I need to run an ohm meter on everything, but any advice on a common fault to look at would be helpful. I know its in that section, just not sure WHERE exactly.
|