Yes thats correct, Also I could undo this "hidden" bolt , but because of the
length of the bolt and the close proximity of the frame I couldnt remove it
fully until the cover was away from the bike. This is not a big problem, but I
had to place the bolt in position in the cover before replacing it on to the
engine. if that makes sense? Maybe once you`ve taken the cover off and
cleaned the old sealant off refit it dry(no sealant) and try and get this bolt
in. I forgot to do this with mine and refitted the cover with the sealant on
and had to take it all off again ,clean it up all because couldnt get this
bloody bolt in!! But eventually this method worked for me.
|