hi guys and thanks for your replys , last friday i took the carb off the bike and cleaned the outside then stripped it down and put it in a friends ultrasonic cleaner i borrowed . the whole carb would not fit in and submurge so i had to keep revolving it around , 2 hours later and i reasembled it . i removed the intake rubbers and resealed them, then on with the carb . the bike started 3rd kick and runs well , i will post again in a few days to report back how things are going but it is starting ok, will have to take it for longer run to see if it still surges in the higher revs . it still pops a little on slow speed up changes ive reset the mixture screw to 2.5 turns out which i think is correct, before it was 3.5 turns out so it is now a little leaner . zigzag
|