Remove ignition switchon xt600e 2003
Hey, i've run into a problem.
I'm about to take my ignitionswitch of for repair, but im stuck.
I've drilled out the 2 screws fromt he top with the "brake of heads" and now the iginition barrel itself is loose. I then removed then handlebar, and then the top triple clamp, and i know have the triple clamp with the ignition on, and cant get any further.
The ignition barrel itself is loose, but i cant dismount it.
Pics:
As i see it, i need to drill out the bolts or what they are from the bottom (picture 3 and 4) to then removed the gulden screws seen from the side between the barre and the ignition itself in the last picture.
But im not sure if I do this, than i can assemble the whole thing again, and even with a new ignition switch, this would also had to be done (as i see it) to mount it.
What dont I see, or is this really the way to go? The bike stands in the yard, disassembled with tools and nuts verywhere, so please help
|