Hi , the side stand switch from what i can remember doesnt strip down as its a sealed unit, i did find with my TT600R the ht lead on mine just screwed with no rubber cover, this did get damp and would stop the bike and would only run if it was bone dry, also if the battery was down on charge the starter motor would take all the juice and leave very little for the coil, if the bike has been dropped of the throttle side there could be a problem with the cut out switch, you may fing also the push connections for the ignition and most of the wiring isnt the best protected. Poor earth on the coil or battery
could cause it, though my mates RE shorted out the starter solernoid with having low battery charge welding the contacts together.
Good Luck.
Mark
|