Finally the flywheel gave up ang came loose using a old socket and longer bolts for the puller   The starter clutch was also fighting a little bit but using a puller it came loose to.
Cleaned up everything and put all back together again, when try to start the battery was shot so I got a new one but the starter would not turn around the engine, used the kick and it fired up after a few kicks, running good and charge as it should, 14 v, due to the charging problem it started with half a year ago. I think the starter is the problem, it turns but slowly, maybe it is stuck because it have not been used in 3 years. Have a spare starter i will try tomorrow and see if it works then.
Thanks for all the tips I get here in this forum.
|