Tenere 1VJ problems with battery charging
Tenere 1VJ does not charge battery, so I measured resistance between white wires coming from stator:
W1-W2 = 1.8 OHM
W1-W3 = 2.6 OHM
W2-W3 = 1.6 OHM
This seems like OK values to me. Then I checked resistance between white wires and ground (minus on battery):
W1-Ground = 1.4 OHM
W2-Ground = 1.6 OHM
W3-Ground = 2.1 OHM
This does not look OK. If I understand correctly this values should much higher. What else could I measure to narrow down possible causes for my problems?
If stator is faulty, can I replace it with stator from 3AJ Tenere?
Thanks
|