|
|
24 Jul 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: May 2013
Location: Wisconsin, USA
Posts: 827
|
|
You already have a 47t rear with that 14 front ? Might as well go down to 13 front. Each front tooth difference is equal to 3 teeth in the rear.
This will officially be the lowest geared bike I know of, at 90kph the motor will be maxed out on the rpms. Sorry just can't figure this one out. I've always noticed when something is geared too low, it makes first gear worthless so you have to shift right away,and then again, which is slower takeoff than proper gearing.
|
25 Jul 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Dec 2008
Location: Denmark
Posts: 1,417
|
|
4800rpm at 90, not too bad...
Its great for woods riding, especially on the xt600e, with the huge gap between 1st and 2nd gear.
|
25 Jul 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: May 2013
Location: Wisconsin, USA
Posts: 827
|
|
Even with that gearing ? You sure on that ? I have 16/42 on my 3TB motor and it still is 3600 at 55mph (90kph), was 4200 with the 15 T. The newer ones must be really,really internally geared high. With 13/47 I'd be somewhere in the 5800-6000 range
As a comparison , one of my kicker xt's has 16/38 and it runs only 3300 at 55 (90kph) a little lower. These are just highway commuters, not real good offroad.
|
25 Jul 2015
|
|
Registered Users
Veteran HUBBer
|
|
Join Date: May 2009
Posts: 235
|
|
Quote:
Originally Posted by nikroc
I know I've asked but Im wanting to increase acceleration..I have gone down to a 14 t front but want to try and gain some more.
Im struggling to find a smaller front sprocket but am able to get 45/42/41 T rear sprockets...
ANY opinions ??
|
Quote:
Originally Posted by nikroc
Thanks for the reply. I have tried to follow the link you posted and although it said it was translated it remained in german.
is the xt 600e sprocket set the same sizes as the tt600 re?..I have no idea and would even know if the chain will need shortening or making longer
|
Quote:
Originally Posted by nikroc
ok..do I go down to a 13 on the front or up on the rear.currently running 14/47...
|
I understand you 100%, the 600 XT/TT yamahas are excellent bikes but a little soft in the engine department.
Your TT600RE has the exact engine as a 1990-1994 XT600E. So when you order front sprockets do NOT order front sprockets for the TTR600, they have the same spline pattern but are way thinner. The rear sprockets patterns are the same on the TT600RE and XT600E (but the TTR600 has a different pattern)
I, like yourself, ended up with 14/47 on my old TT600RE. It is a good ratio if one is riding below 100 km/h. I now have a XT600E and have tried a few different combinations of front/rear sprockets. The fact is that if you go too low you wont be using the torque of the engine effectively. You now have gearing close to perfect IMHO. Go one up on the rear if you want to change.
__________________
----------
Yamaha XT600E '01, Honda XR400 '03, Yamaha XT550 '83
|
26 Jul 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Sep 2012
Location: Middle USA
Posts: 349
|
|
I have a USA model 1986 XT. Stock gearing is 15/42. I like to use either 14/42 or 15/45. This is the same 3 to 1 ratio. Unless you are hi way causing at lower elevations then I think this is the perfect ratio. Good around town and good in Colorado at over 14000 feet.
__________________
'84 XT600 is now bored to 2nd oversize and new OEM pistons and rings installed. No more smoking.
|
26 Jul 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Jun 2012
Posts: 135
|
|
Quote:
Originally Posted by steveloomis
I have a USA model 1986 XT. Stock gearing is 15/42. I like to use either 14/42 or 15/45. This is the same 3 to 1 ratio. Unless you are hi way causing at lower elevations then I think this is the perfect ratio. Good around town and good in Colorado at over 14000 feet.
|
Thanks for the reply. Im guessing my 2003 tt 600re is a similar engine although stock gearing is 15/47.
NOT wanting to stress the engine,it already sounds like a bag of nails!
|
27 Jul 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Dec 2008
Location: Denmark
Posts: 1,417
|
|
If its geared like the E model, it will do aorund 4000rpm at 100km/h (depending on tire) So theres plenty of room to gear it down.
Im running 15/47 for street with a SM tire, so going down 2 tooth in the front for the woods, with a taller rear tire isnt that radical at all.
|
27 Jul 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Jun 2012
Posts: 135
|
|
Some where along the line I think that what I was originally asking has got lost.
To recap.
Im running a 2003 tt60re with a 14 front sprocket. Standard gearing which is,according to the owners manual 15/47.
I would like a bit more initial accerleration. Im NOT interested in top end speed and don't want to go offroad.
I appreciate ALL the advice already given.
Thank you
Last edited by nikroc; 27 Jul 2015 at 19:16.
|
27 Jul 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Dec 2008
Location: Denmark
Posts: 1,417
|
|
Did you manage to find a 13 CS sprocket?
I bought mine on the german ebay, its made by PBI.
Front sprocket is called "ritzel" cant seem to find anything just now, but they're there from time to time.
|
27 Jul 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Jun 2012
Posts: 135
|
|
TBH I haven't looked as I didn't know w hat I was looking for. It's tonight's web mission. Thanks.
|
28 Jul 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Jun 2012
Posts: 135
|
|
I cant find a 13 tooth front sprocket ...whats the rear equivalent??
|
28 Jul 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Dec 2008
Location: Denmark
Posts: 1,417
|
|
1 front equals 3 in the rear.
|
28 Jul 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Jun 2012
Posts: 135
|
|
treat me as a thick bugger..if I was to want the equivilant of going down to a 13 tooth front on the rear what rear sprocket size do I 'want?...
|
29 Jul 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Dec 2008
Location: Denmark
Posts: 1,417
|
|
47 + 3 = 50
|
29 Jul 2015
|
Registered Users
Veteran HUBBer
|
|
Join Date: Jun 2012
Posts: 135
|
|
Tank You..on the hunt..
|
Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...
2020 Edition of Chris Scott's Adventure Motorcycling Handbook.
"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)
Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.
Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.
Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!
What others say about HU...
"This site is the BIBLE for international bike travelers." Greg, Australia
"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK
"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia
"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA
"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada
"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa
"This is the answer to all my questions." Haydn, Australia
"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany
Lots more comments here!
Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook
"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.
Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!
New to Horizons Unlimited?
New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!
Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.
Read more about Grant & Susan's story
Membership - help keep us going!
Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.
You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.
|
|
|