XT600E engine oil overflow where?
Hey guys!
Can anyone tell me where in the heck is the engine oil overflow on the XT600E?
I went to buy the 3.3litres needed to make a complete oil change but I think the guy put 3.5litres in the 5litre water bottle...
I'm asking because I got some oil that is going on to the downpipes right next to the midpipe connection...
the only engine oil lines I remember of seeing were: - the crankcase breather (next to the e-start motor)
- the oil line that goes from next to the crankcase breather line, beneath the fuel tank and attaches to the left side of the backbone.
- one larger line which part of it is in metal tubing and goes from the right side of the backbone down to the engine and also attaches next and behind the e-start motor.
- another is the one that goes from the bottom of the frame(in the front) down to the engine.
- and the last one I remember is a metal tube oil line that attaches next to the oil filter housing and on the top of the crankcase with two oil screws and 4copper washers (two on each screw).
Am I forgetting any?
btw.. I checked the oil bleed screw on top of the oil filter housing to see if the oil was circulating and......I just unscrewed it and only lifted it a very tiny bit and I got an oil shower  lol
Vando
|