GS Ignition Problems
Hi gang,
I'm having problems with my 95 PD airhead that some of you experts might be able to help with. The bike has 28k miles and is in good shape. I have modified the bike with new plug wires/caps, Thunderchild diode board with solid mounts, and a high output voltage regulator.
When the bike gets warm, the ignition will cough and skip as if it's running out of gas. One time, the bike stalled and would not restart. There was plenty of fuel in the float bowls, but when I checked the plugs there was no spark. After about 20 minutes the spark was back and the bike ran well.
The consensun on the GS list was that it was a coil problem. However, I replaced the coil with a Dynacoil and there were no changes in the symptoms.
The other possibilities for this problem seem to be the ECU and the Hall trigger unit. Has anyone had similar problems, and what was the cause? I am planning on riding this bike RTW so I need to straighten out this problem.
Thanks for your advice.
Story
|