desert dweller I have synced the throttle bodies with a mercury vacuum gauge. They read differently at idle and at about 2k rpm. I synced them at 2K. I am on about my sixth set of throttle cables as they just seem to wear out from all the grit from the dirt road getting in there.
DC lindberg, I live in a condo complex and am not allowed to work on the bike here, so I was trying to get an indea of what to try, as I am going to have to do the work at a friends house and try to do it as quick as possible. I will first try adjusting the air/fuel mixture screw and while I do that I will pull the plugs and check the compression. If that doesn't fix it I will post again with updated details.
As for the fuel injectors, how do I check them?
When I checked the spacing on the valves, 1 side was fine, and 1 of the other valves on the opposite cylinder was out, and the other three were fine(I think). I set the distance to the amount spec'd in my miantainence book. I think thats in storage but I'll post when I have the info.
Thank you both
Dylan
|