I had to buy 2 mirror mounts to clamp to bars like these
Google Image Result for http://www.4-motorcycles.co.uk/acatalog/MRUMNT01.jpg
(3rd pic) Then put an M8 bolt through the mounts M10 thread (£4.50 for 2 fine pitch allen bolts no thanks)
I also drilled a hole in the supplied bracket which lined up with the outer small clamp bolt this makes them easier to adjust left + right
They come with 55W bulbs so they are quite bright but the lense means the beam is low and wide which is great for dark country roads
The hardest parts of fitting was routing the wires as the side panels don't come off that far with the crash bars on as for wiring i found it easy (AS Level Electronics) no need for the diagram but this could be different for you. Just use the spare 10A fuse in the box to power a relay (like me) or get power directly from the Fuse either way the can't be switched without the ignition on
|