I Started the bike this afternoon

1) First start - with choke on - Started up and had a low idle but kept engine running with the handle bar throttle - turned Choke OFF, No Change in idle speed But, kept my hand on the Throttle so it would stay running.

2) Second kick start with Choke OFF - Low Idle, kept running with handlebar Throttle - "I then began turning the Throttle Stop/Idle Adjuster (picture added) , kept turning it and at about 6 full turns the engine would just stay running, let off on throttle, turned the Throttle Adjuster about 1 More full turn which raised the Idle Slightly, Blipped the throttle and the Idle stuck at 3000rpms, while at 3000rpms I backed off the Throttle Adjuster 1 full turn and the Idle Dropped back down to where it was, I had to work the throttle opened by hand to keep engine running.

3) While I was holding the Throttle at a Steady RPM, I sprayed Carb Cleaner all around the Two Intake Boots, the Idle did not seem to change at all.

4) While engine is Running, the Carb seems to be Sputtering/Choking, like it is not getting enough fuel and also backfiring while running.

Would a Choke Problem be the Cause of my Idling Issue along with the "Sticking on High Idle" when the Throttle Adjuster is moved to a certain point?

I am determined to fix this so Please keep the Suggestions Coming!!

Also, the Engine Sounds Really Good, no odd noises, I am really happy about that!!

(I have come to the conclusion that I need to pull the carburetor "Again", and work in that area behind the Choke Rod on Inside of Carb. The Choke did not seem to do anything to the idle speed when I pulled it In or Out with the engine Running)

Attached Thumbnails