valve clearances
Valve Clearances (Cold)
Inlet 0.05-0.10mm (0.002 - 0.00 in)
Exhaust 0.12 - 0.17mm (0.005 - 0.007 in)
The choke is a very simple item on the XT.... strip it out and make sure it aint sticking.
Just a tip..... DO NOT USE ANY THROTTLE! leave it alone until she fires or you will be a pool of sweat ( as you found out  ) before you ever get her going
My routine.... choke on, fuel on, gentle press on kickstart to operate decompressor.Kick once....., Repeat. as soon as she fires give it a little gas....... no more than 30 seconds on the choke,,, they dont need it.
martyn
|