Wiring problems, need help!! XT600E
Hey guys!
I'm having three issues with my wiring harness "due" to my new airbox..
I need to increase the cable length of a few wires so I can place the TCI exactly where I want it!
1) The 2 cables that go to the coil.
2) The 2 cables that go to the rear pedal brake light switch.
3) The cables that go to the TCI
The 2 cables from the rear pedal brake light switch are easy!
It's the other cables that I'm concerned about...
They will all be soldered so I think there should not be any problems...
But still I need your expert opinions, will this make the TCI or the coil not work properly?
Plus, there are only two cables left to connect, one is from the neutral switch (that has one end next to the front sprocket...(it's the other end)) it's a strong blue but the other end is a lighter blue?
Did Yamaha runout of that same blue color wire? lol
Plus, I don't know if I'll bypass the side switch stand or not... if not, I also need to increase those two cables.. it does work flawlessly!
Vando
|