With regard to a tool to undo yer forks
I got a 12mm setcrew 50mm long on to that I screwed 2 nuts ( 12mm )
onto the end of that I welded a 5/8 whit nut That nut slips over the remaining thread
Then I put a 19mm socket on the setscrew end ( with the help of the extra nuts it stops straight ) on that I put 2 -300mm ( 1 foot ) socket extensions
then ratched it undone
I had to do it this way as the capheads at the bottom of the forks were all gunged and rusted into their reccesses
After undoing the forks I roasted the fork ends with a blowlamp and easing oil did the rest. When I replaced the setscews I wraped them in PTFE tape to stop ingress of dirt and water
HTHY Mick
__________________
Cant leave a trail for others to follow by sitting on yer arse
|