Second carb opening
My XT600 3AJ would missfire and hicup at 3000 rpm or higher when engine got hot. After alot of trial and error I think I have fixed this problem by changing the stator plate but still using oringal pick up,
Now the bike feels low on power when I acelarate it feels like you are riding with the choke on.I have disconected the choke cable but no different.
Today I took carbs off again and to measure when the second carb starts to open it was at about 9mm I have adjusted it to open at 5mm but ran out of time to put every thing back together.
What affect would you get if the second carb was opening not opening till 9mm?
Is there any thing else I can check before carbs get put back.
I cleaned carbs about 5 weeks ago but found what I think is very fine rust at the bottom of float bowl,my bike used to have inline fuel filters on petrol pipes but these were removed by a mechanic as he said they were very close to the exhaust and as I had fuel filters in the tank they were not needed has any one had problems fitting inline filters?
Thanks
|