Put a couple good squirts of motor oil down the spark plug hole and kick it over slowly a couple times to make sure the cylinder walls are good and coated, then just squirt of gas, put plug back in, slowly push the kick lever down till it hits "the wall". push just hard enough till it passes that spot, get past it barely. Release the lever to allow it to return fully. Now kick it like your trying to shove the lever 2 feet into the ground. If no fire then you have something other than fuel issues. It may not completey start but it should fire and sputter for a bit. And remember, no throttle whatsoever when doing this. After this you may try repeating this whole setup only give it 1/16 of a turn of throttle, just to try.
I will never use starting fluid on gas motors !
I kind of suspect it is cdi . Try tapping it several times with a screwdriver handle.
|