Occasional clunk noise when letting out clutch in 1st gear?
Hey all,
What seems to be the clutch/gearbox on my XT600 recently started making the occasional clunk sound when I'm in first gear with the clutch lever pulled in and start letting it out. It isn't accompanied by any judderiness but the noise is a bit disconcerting.
Any ideas on what could be the cause of this? The bike had some stuff done to it a day before I started noticing it happening:
- changed the exhaust
- changed the clutch and brake levers
- had the rear wheel and tyre changed (double checked the chain slack and it looks to be within the specs in the manual)
- drilled out a stripped allen bolt holding the tacho cable in the tacho drive while it was still attached to the engine
Likeliest culprit seems to be either the rear wheel change or the bad vibrations from drilling out the allen bolt borking something up.
Here's a short video to illustrate:
https://sendvid.com/e64v507i
Thanks!
|