single carb xt600 2003
hello from Crete! so recently i decided to properly fix my single carb mod , because i had some problems (kept getting air from somewhere and it was splattery and carb kept falling off!)
i decided to mill the carb and fit it in the intake and have small cut on the intake and just put a heavy duty clamp on it...
now it works like a charm...
didn't chop the frame at all... the carb is a mechanical dellorto phm 38mm
https://imgur.com/a/dIxDa
Last edited by nickargas; 2 Jan 2018 at 11:09.
|